A slightly different synchronisation problem

[Filly]

Hi - I remember I managed to resolve this when using SX 1 but can't find it in SX 2.
SX is sending midi clock to my Virus and it's receiving it OK, but I want my LFO cycles to start when I hit play, rather than try to hit play when I think the cycle is about to start

There was some option I recall which resulted in the midi clock being reset when the play button is pressed.

Any ideas? - Cheers

[Hollowcell]

I'm guessing you are talking about how the LFO cycles with incomming midi.

I think everything you need to read about this is on page 73 of the VC manual (the LFO edit menu).

Hope this helps you! :)

[hatembr]

actually what you need is an external lfo trigger! you'll find that in the Tips and Tricks part of the C manual (page 155)

basically, you need to send a Controller #70 for LFO1 and a Controller #82 for LFO2 and LFO3 with the appropriate values (0=poly mode, 1=mono mode). Both modes reset the LFO cycle and retrigger it!

[Hollowcell]

:oops: Sorry about that!

After re-reading your post I realized you want the LFO to trigger when you press play on your sequencer. For some reason I was thinking you want it to trigger when you play a note (reading from pg 73 tells you about this anyways). :D

Thanks Hatembr! :wink:

[hatembr]

:D no prob!

i quickly understood what he was meaning because i asked the same question when i first bought the virus, i posted questions here and there but didn't get any answer, actually i didn't even know the expression "external trigger" at that time :) so i looked into the manual again, line by line until i found that tip on page 155 :)

[freeman]

thanks :D i'm sure i would have been digging for this very soon. saved me some time 8)
________
Live sex (http://livesexwebshows.com/)