PDA

View Full Version : Can Velocity or Aftertouch modulate hypersaw detune amount?

DIGITAL SCREAMS
15.04.2005, 05:31 PM
Just wondering.....

Would be a neat feature if it could.

Anyone know?

DS
EnjoyRC
15.04.2005, 06:28 PM
... or route the MOD Wheel to it. That would be nice too.
MADSTATION
15.04.2005, 06:29 PM
EnjoyRC: Well it's mostly certain that it will be assignable to the mod wheel :) Would be nice to be able to modulate it in the mod matrix.

I guess we will find out in the manual! ;)
ben crosland
15.04.2005, 08:00 PM
No prob 8)
Tomer=Trance
15.04.2005, 08:15 PM
you can use aftertouce of velocity to modulate oscilator 2 and 3 on the B and C so i cant see why you wont be able to do so on the TI. :o
ben crosland
15.04.2005, 08:38 PM
you can use aftertouce of velocity to modulate oscilator 2 and 3 on the B and C so i cant see why you wont be able to do so on the TI. :o

Due to their different architecture, the parameters of the HyperSaw oscillators have their own mod assigns in the matrix. So, Osc2 Detune is a different parameter from Osc2 Detune Spread when Osc2=HyperSaw.
Tomer=Trance
16.04.2005, 09:05 AM
i see,but still the basic idea is the same.
total control..
DIGITAL SCREAMS
16.04.2005, 09:18 AM
Ben, you know in your sonic state demo.....near the beginning of the clip....you have hypersaw selected on oscilator 1 and your using one of the softknobs to change the detune amount. Could I route this feature to velocity and/or aftertouch?

Just wondering....

Cheers

DS
ben crosland
16.04.2005, 01:26 PM
Ben, you know in your sonic state demo.....near the beginning of the clip....you have hypersaw selected on oscilator 1 and your using one of the softknobs to change the detune amount. Could I route this feature to velocity and/or aftertouch?

DS - see my 'No prob' post ;)