Cubase Sx1 VSTi Parameters

[techno_7]

Hi!

Heres the thing:

I just bought a Edirol PCR-M50 MIDI controller and i want to assign it's knobs and sliders to Cubase SX's VSTi's but i need to know what MIDI number these parameters on the VSTi's have. Is there any way i can do that without a manual to every single VSTi?

Also, do anyone know how to "bounce" VSTi's?

[jasedee]

I just bought a Edirol PCR-M50 MIDI controller and i want to assign it's knobs and sliders to Cubase SX's VSTi's but i need to know what MIDI number these parameters on the VSTi's have. Is there any way i can do that without a manual to every single VSTi?

Also, do anyone know how to "bounce" VSTi's?
I havent tried this yet......I also have a Edirol PCR50 and in the manual it says I can control faders etc from cubase, but I still havent gotten around to actually figuring out how to do it.

As far as bouncing goes.....just solo the VSTi channel, set your left/right locators, and click export audio file.

Easy.

:)

[techno_7]

I just bought a Edirol PCR-M50 MIDI controller and i want to assign it's knobs and sliders to Cubase SX's VSTi's but i need to know what MIDI number these parameters on the VSTi's have. Is there any way i can do that without a manual to every single VSTi?

Also, do anyone know how to "bounce" VSTi's?
As far as bouncing goes.....just solo the VSTi channel, set your left/right locators, and click export audio file.

Easy.

:)

Yeah thats the way i usually do it.?

I just wanted to know if there was an even easier way 8O

Hehe i'm lazy :)

[Juho L]

Doesn't the instrment freeze function work like an automatised bouncing?

[techno_7]

Doesn't the instrment freeze function work like an automatised bouncing?

Yes thats what i heard i could do, but HOW?

[Juho L]

Yes thats what i heard i could do, but HOW?

Select VST freeze from the menu maybe? ?hih.

[techno_7]

Yes thats what i heard i could do, but HOW?

Select VST freeze from the menu maybe? ?hih.

Maybe.

[Hollowcell]

Hi!

Heres the thing:

I just bought a Edirol PCR-M50 MIDI controller and i want to assign it's knobs and sliders to Cubase SX's VSTi's but i need to know what MIDI number these parameters on the VSTi's have. Is there any way i can do that without a manual to every single VSTi?

Also, do anyone know how to "bounce" VSTi's?

I'm not sure about setting up VSTIs in Cubase with an external controller as I don't use VSTIs so much, but setting up a controller for faders, sends and EQs is relatively easy. I'm using Cubase VST32 and all I do is edit the remote section (just look for remote in the menus). I use my Virus knobs for basicly everything in Cubase.

I'm guessing SX is the same or at least similar. :)

[techno_7]

Hi!

Heres the thing:

I just bought a Edirol PCR-M50 MIDI controller and i want to assign it's knobs and sliders to Cubase SX's VSTi's but i need to know what MIDI number these parameters on the VSTi's have. Is there any way i can do that without a manual to every single VSTi?

Also, do anyone know how to "bounce" VSTi's?

I'm not sure about setting up VSTIs in Cubase with an external controller as I don't use VSTIs so much, but setting up a controller for faders, sends and EQs is relatively easy. I'm using Cubase VST32 and all I do is edit the remote section (just look for remote in the menus). I use my Virus knobs for basicly everything in Cubase.

I'm guessing SX is the same or at least similar. :)

I guess it is...ill try it out!

Thanks for ya help man.

[techno_7]

Ok, i have now found out how to use controllers.

But i still have a problem because i dont really get into the VSTi.
I can only control the VSTi mixer which is for volume and sends ect.

Is there any way i can control the parameters INSIDE the VST?

It seems that i can only control the VSTi MIXER, MIDI MIXER, Master MIXER, the transport, and master commands of cubase. Where do i control ONE specific VSTi's parameters and not the mixers?

[ten]

Yes you can, but you need to find the manual or goto the website and find the midi cc listing for each vsti you're using, then map those cc numbers to your midi controller. Most of them are the same or very similar, but some are different. Some support midi learn where you click the midi learn button, turn a knob on your midi controller and it will bind to it.

Also I dont believe freeze was in sx1, or at least it was extremely shit if it was. Its only just got useable on sx3 so it might be worth looking to upgrade (only ?100 from arbiter.co.uk)

ten

[techno_7]

Yes you can, but you need to find the manual or goto the website and find the midi cc listing for each vsti you're using, then map those cc numbers to your midi controller. Most of them are the same or very similar, but some are different. Some support midi learn where you click the midi learn button, turn a knob on your midi controller and it will bind to it.

Also I dont believe freeze was in sx1, or at least it was extremely shit if it was. Its only just got useable on sx3 so it might be worth looking to upgrade (only ?100 from arbiter.co.uk)

ten

But how?

In my General Remote in device setup theres only MIDI mixer VSTi mixer mixer command and no assignment listet in the popup.

[ten]

You need to find out how to assign certain cc numbers to the knobs on your midi controller. Assign the cc numbers that are the ones you want to control on the vsti, this is why u need the cc map for the vsti. You will also want to read the manual to your midi controller to find out how to assign certain ccs to the knobs. Dont worry about all that general remote mixer shit, its a load of crap in sx1 and doesnt work properly.

ten

[techno_7]

You need to find out how to assign certain cc numbers to the knobs on your midi controller. Assign the cc numbers that are the ones you want to control on the vsti, this is why u need the cc map for the vsti. You will also want to read the manual to your midi controller to find out how to assign certain ccs to the knobs. Dont worry about all that general remote mixer shit, its a load of crap in sx1 and doesnt work properly.

ten

It should be the same concept in SX1 as in SX3.

[ten]

You would think so wouldnt you.

A lot of things are broken and were left broken in sx1 only to be fixed in sx2/3.

Either way, you need to read the manuals for you're controller and sx.

ten

[techno_7]

You would think so wouldnt you.

A lot of things are broken and were left broken in sx1 only to be fixed in sx2/3.

Either way, you need to read the manuals for you're controller and sx.

ten

I have no problem with finding the parameter numbers, my problem is HOW TO ASSIGN THEM TO MY MIDI CONTROLLER?

[ten]

I give up, rtfm and get on with it jack ass.

ten

[techno_7]

I give up, rtfm and get on with it jack ass.

ten

How much do a upgrade cost?

[ten]

?100 from sx1>sx3

I would suggest going to www.cubase.net and asking there. They will be able to explain better.

ten

[techno_7]

Yes i just found this forum right before you told me;)

Thanks still

[techno_7]

Damn why cant anyone answer my question?

I went to Cubase.net where there should b at least a few pro's but NO ONE fucking knew!!!