View Full Version : TI 1.05 online
http://www.access-music.de/downloads.php4?product=virustikeyboard
Installing now.....lets see whats new :)
1.0.5 - 26.Oct.2005
- Program change support fixed
- Automation related crash bug fixed
- Latency compensation related bug fixed
- Ableton Live5 related improvements, 5.0.2 is mandatory
- Audio driver version 1.2.0 included (Mac Only)
- Arpeggiator drift related bug fixed
ooo a few goodies there.....updating right now, will have a play tonight and see whats what..
ten
MADSTATION
28.10.2005, 08:23 PM
Wow that sounds exciting!
Can't wait to try it out myself :)
Let us know how it goes!
And thanks for postsing the list of features.
Xtigma
28.10.2005, 08:27 PM
Im very impressed at the speed that Access is releasing fixes.
keep up the good work!
midislut
28.10.2005, 08:49 PM
8)
Good news! I'll definitely try that out tonight, I have been trying to get it to work with Live 5.0 with VirusControl and haven't had much luck. Hopefully this fixes most of the major issues.
Xtigma
28.10.2005, 09:10 PM
well... i still have the same problem as i had before
when i record automation.. cubase just crashes...
anyone else with this problem?
Arp seems a fair bit better.....still getting some notes skipped/missing tho.....generally a lot more stable, havent had a single note hang/stuck in over an hour of play....good job, getting there :)
ten
ben crosland
28.10.2005, 09:34 PM
well... i still have the same problem as i had before
when i record automation.. cubase just crashes...
anyone else with this problem?
Nope - works fine here. Are you Mac or PC?
Tinnitus
28.10.2005, 09:42 PM
It's still the same here. No better or worse. MIDI timing is all wrong, popping noises and when I try to bounce a MIDI track to audio I end up with just high peaked digital noise.
MADSTATION
28.10.2005, 09:51 PM
Tinnitus: You have to export in real time.
ben crosland
28.10.2005, 09:52 PM
It's still the same here. No better or worse. MIDI timing is all wrong, popping noises and when I try to bounce a MIDI track to audio I end up with just high peaked digital noise.
Are you bouncing in realtime? And have you tried larger buffer sizes?
It's still the same here. No better or worse. MIDI timing is all wrong, popping noises and when I try to bounce a MIDI track to audio I end up with just high peaked digital noise.
If your using cubase try this. go into device setup and then click on VST Audiobay , then expert, in there set audio priority to low and put a tick in adjust for record latency. Then in export select real time export.
It should work, let us know?
midislut
28.10.2005, 10:08 PM
It's still the same here. No better or worse. MIDI timing is all wrong, popping noises and when I try to bounce a MIDI track to audio I end up with just high peaked digital noise.
If your using cubase try this. go into device setup and then click on VST Audiobay , then expert, in there set audio priority to low and put a tick in adjust for record latency. Then in export select real time export.
It should work, let us know?
he is a sonar user...go figure :roll:
sonar audio engine is not gapless...so get yourself cubase sx
Tinnitus
28.10.2005, 10:12 PM
No I'm not bouncing in realtime, but I unchecked the option "fast bounce" in sonar and now that problem is solved :)
Nomatter what I set the buffer size to it's pretty much the same.
Thanks Ben.
No I'm not bouncing in realtime, but I unchecked the option "fast bounce" in sonar and now that problem is solved :)
Nomatter what I set the buffer size to it's pretty much the same.
Thanks Ben.
Do you have a driver for that soundcard where you can change buffer size (latency) like on the RME cards? I had the same problem first time i ran it and found setting to 6ms solved it!
Tinnitus
28.10.2005, 10:20 PM
sonar audio engine is not gapless...so get yourself cubase sx
I've tried out cubase sx, but I think sonar gives you a much better workflow.
Xtigma
28.10.2005, 10:21 PM
well... i still have the same problem as i had before
when i record automation.. cubase just crashes...
anyone else with this problem?
Nope - works fine here. Are you Mac or PC?
PC
i'll make a little video of it tomorrow...
i have an EMU 1820m soundcard (which is in my opinion shit)
1xUAD 1xPoco MK1 1xPoco MK2
also i formatted just incase... problem still there
Tinnitus
28.10.2005, 10:32 PM
No I'm not bouncing in realtime, but I unchecked the option "fast bounce" in sonar and now that problem is solved :)
Nomatter what I set the buffer size to it's pretty much the same.
Thanks Ben.
Do you have a driver for that soundcard where you can change buffer size (latency) like on the RME cards? I had the same problem first time i ran it and found setting to 6ms solved it!
Thank you very much! :)
That helped alot, but the MIDI is still not as tight as when I run it with my MIDI interface and the analog outs.
No I'm not bouncing in realtime, but I unchecked the option "fast bounce" in sonar and now that problem is solved :)
Nomatter what I set the buffer size to it's pretty much the same.
Thanks Ben.
Do you have a driver for that soundcard where you can change buffer size (latency) like on the RME cards? I had the same problem first time i ran it and found setting to 6ms solved it!
Thank you very much! :)
That helped alot, but the MIDI is still not as tight as when I run it with my MIDI interface and the analog outs.
Make sure to run the TI on a USB2 port thats not shared on the same buss by anything other than the TI. Do not use a USB HUB!
Make sure you have lattest bios and USB2 drivers for you motherboard before you install the software!
Check list :roll:
New updates are a major improvement for me, with some productive satisfaction at last.
:P
dr. orange
29.10.2005, 12:01 AM
What good news to come home... Should I still wait for the major bugs being fixed or buy that box? Don't know yet
Well I did a install with the new 1.05 on my powerbook and things seemed a little bit better but didn't seem like a big change so I was dissappointed at first.
But then I did a quick search for the word 'virus' in finder and deleted everything that came up that seem related to the virus and did a reinstall of just the midi/audio drivers.
Now I see a huge difference in performance and things seem much better. I have a stress test live set that would just bring the previous installs to their knees with no hope of staying in sync (lots of arpeggios and midi control messages) and that is staying in perfect timing now 8)
Not sure why but for whatever reason there must have been some left over code from the very first TI os install that I did (1.01?). But looks like I will actually be "integreated" this weekend :wink: thanks access!
Just installed...getting better guys...have 3 arps running then export...little drop out but its moving along well...Ill be releasing some new hard trance and a remix soon!
Doc Jones
29.10.2005, 06:42 AM
that's great news. Glad to hear you guys are starting to have some success.
I still get hung notes at 65% cpu and 4 or 5 chanels of Virus Control using analog outs.
Ps, I get no LFO sync using normal midi cable in SEQ MODE - same patch syncs well with USB midi / Virus Control
Even with the 1.05 update I am still struggling a little bit to get it to work with my Live/Powerbook setup. I have a stress test live set with several arpeggios and lots of midi control data in the background (like pitch bend and modulation) and that just creates a "midi log jam" in which it sounds like the TI can't keep up with the data being sent to it. It really slows down playing the notes and then all of a sudden it will play a bunch of notes super fast to get back in sync.
Strange thing is that I could have sworn I had things working great Friday night, no 'log jams' to speak of. But then on this weekend things are getting worse again. One interesting thing is that I play the same Live set on my work laptop running windows xp and it plays it back fine. Makes me wonder if there is some 'magic' preference setting that I need to use on the powerbook or in Live so that things are better.
But at least I think I saw a glimpse of "total integreation" working on Friday night, not sure if it was real or a dream, either way it was a beautiful thing :D
Even with the 1.05 update I am still struggling a little bit to get it to work with my Live/Powerbook setup. I have a stress test live set with several arpeggios and lots of midi control data in the background (like pitch bend and modulation) and that just creates a "midi log jam" in which it sounds like the TI can't keep up with the data being sent to it. It really slows down playing the notes and then all of a sudden it will play a bunch of notes super fast to get back in sync.
Strange thing is that I could have sworn I had things working great Friday night, no 'log jams' to speak of. But then on this weekend things are getting worse again. One interesting thing is that I play the same Live set on my work laptop running windows xp and it plays it back fine. Makes me wonder if there is some 'magic' preference setting that I need to use on the powerbook or in Live so that things are better.
But at least I think I saw a glimpse of "total integreation" working on Friday night, not sure if it was real or a dream, either way it was a beautiful thing :D
can you send me the live arrangement to ms@virus.info? i'd like to check this myself
marc
vBulletin® v3.6.4, Copyright ©2000-2025, Jelsoft Enterprises Ltd.