PDA

View Full Version : Daisy chaining


Onkel Dunkel
05.02.2006, 07:34 PM
How long can i run a MIDI cable before it becomes a problem? I just bought a Korg Kaoss Pad KP2 but then realized that i?ve run out of ports on my MIDI-interface :? Now one of my ports is connected to my Sherman Filterbank 2 (only in since it doesn?t send anything but trigger on signals on the out) so i thought i could do as below since they both only use one MIDI-channel each but don?t know if the MIDI-cables will be to long beacuse they will be on each side of my desk.

This is what i?m thinking of doing:

MIDI interface out ---(3 meters)---> Sherman Filterbank in
Sherman Filterbank thru ---(5-6 meters)---> Kaoss Pad in
Kaoss Pad out ---(3 meters)---> MIDI interface in
Total lenght 11-12 meters.

Will i get a problem with this or is it just fine?

Hollowcell
05.02.2006, 11:22 PM
Shouldn't be a problem Onkel. I doubt you'd notice any lag at all.

Onkel Dunkel
06.02.2006, 06:46 AM
Sounds good. I?ll give it a try. Thanx 8)

Drammy
06.02.2006, 07:35 AM
Do you need the MIDI out from the Filterbank?

I personally would set that up a different way,

MIDI Interface out > KAOS Pad In
Kaos Pad Out > MIDI Interface In
Kaos Pad Thru > Filterbank In

This way you have a single loop on your interface and controller and a simle MIDI thru driving the filterbank.

As long as you don't need a returned MIDI signal from the Filterbank I would go this way...


Drammy

Onkel Dunkel
06.02.2006, 08:45 AM
Do you need the MIDI out from the Filterbank?

I personally would set that up a different way,

MIDI Interface out > KAOS Pad In
Kaos Pad Out > MIDI Interface In
Kaos Pad Thru > Filterbank In

This way you have a single loop on your interface and controller and a simle MIDI thru driving the filterbank.

As long as you don't need a returned MIDI signal from the Filterbank I would go this way...


Drammy

There?s no MIDI thru on the Kaoss Pad :? Otherwise it would be the way to go...

jasedee
06.02.2006, 10:27 AM
I say a new MIDI interface is in order...

I have a 5 X 5 MOTU microlite, and Im starting to run out of I/O, Im sure your collection will grow, it might be time for an upgrade

Onkel Dunkel
06.02.2006, 01:17 PM
I say a new MIDI interface is in order...

I have a 5 X 5 MOTU microlite, and Im starting to run out of I/O, Im sure your collection will grow, it might be time for an upgrade

I thought about that but not right now if i can avoid it :roll: