TI OS 3.0.1 is Here!

[Splat!]

w00t, the new OS is out. Haven't tested it yet. Let a new wave of bitchin begin w00t.
:cool:

Changelog:

3.0.1.04 is a feature and maintenance release and is recommended for every Virus TI owner.
-VC: graphical glitches on OSC page (fixed)
-HI: Interpolation-Parameter is now available, if OSC1-Mode oder OSC2-Mode is set to "Wavetable" now
-HI: Dimmed LEDs do not flicker anymore
-HI (Snow): When Virus Control crashed and the Total Integration icon starts blinking, it is possible to change the mode back to Single-Mode now
-VCC: Output-Select-Lists work properly now
-HI: The UNDO buffer is initialized properly after initialisation now
-HI: The knobs and buttons are locked properly when the DEMO SONG is playing now
-HI: "Last edit undone" and "Last Edit Redone" improved
-HI: Analog Boost and Stereo Widener are currently the only types which respond to parameters Intensity and Tune. This is reflected in HI correctly now.
-VC: Graphical problems in Remote template browser (fixed)
-VCC: Analog Inputs working when terminating Virus Control, even when set to "3 outputs / 1 input" just before.
-IN: Firmware update skipped sometimes during installation (fixed)
-VC: Vrong volume levels after disconnect or song load (fixed)
-VC: Recording automation in PT8 doesn't work anymore (fixed)
-VCC: TI2 got the wrong firmware (fixed)
-IN: Improved firmware update process during installation
-VC: Volumes (CC07, and others) aren't sometimes restored when switching songs (fixed)
-SE: Opening song related crash bug fixed
-VC: Vocoder hides frequency shifter in VC (fixed)
-VC: strange behaviour of balance faders in Vocoder section (fixed)
-IN: driver was not installed on certain Windows Vista installations (fixed)
-HI: Rate Reducer Old Typo in OS3 fixed
-VC: Distorted sound on reopening song when using input patch in Logic (fixed)
-VC: error message when selecting 3 output/1 input in Cubase (added)
-VC / VCC: checks if devices are in use by other applications (added)
-SE: Sysex strings output without obvious reasons (fixed)
-SE: LFO sometimes of phase (fixed)
-SE: Patches will now continue sounding after PrgChg or Module change. They are faded out on the next note event.
-SE: AllSoundsOff Chrash Bug fixed (That is the crash when VC is closed)
-ER: Character volumes unified (modified by 1 or 2 decibel)
________
Honda Civic Type R specifications (http://www.honda-wiki.org/wiki/Honda_Civic_Type_R)

[Splat!]

Seems quite stable on the Snow. 30mins of use, no glitches, no crashes.

But, Character doesn't allow me to select Vintage 1,2,3 or Lead Enhancers etc. :confused: It's greyed out.

Other than that, tested it on Ableton 8, works well. :cool:
________
Mazda Sentia specifications (http://www.ford-wiki.com/wiki/Mazda_Sentia)

[Dunkler Engel]

Good thing about living in Germany, seeing these updates first! BUT! I dont see a Mac version up yet... Very odd. I guess Ill be using my bootcamp install of Windows in the meantime to install it and check it out.

Never mind, its up now! :D

[Celestry]

The TI2 Polar being shipped with OS 2.7.6, i'm not sure whether or not i'm ready to try the OS3.x update.... Especially as the 2.7.6 isn't available to download, should i wish to revert!

(?_?)

'What button does what?'

[Dunkler Engel]

Yay!!!! Mac version is up now! Downloading...

[marc]

Seems quite stable on the Snow. 30mins of use, no glitches, no crashes.

But, Character doesn't allow me to select Vintage 1,2,3 or Lead Enhancers etc. :confused: It's greyed out.

Other than that, tested it on Ableton 8, works well. :cool:

all fine here. are you talking about Intensity and tune? because the algorithms mentioned above simply don't have those parameters ...

marc

[Ronkaz]

-HI: Analog Boost and Stereo Widener are currently the only types which respond to parameters Intensity and Tune. This is reflected in HI correctly now.

is that what you mean?

r

[Splat!]

all fine here. are you talking about Intensity and tune? because the algorithms mentioned above simply don't have those parameters ...

marc

Ah, cheers Marc-o-tron.

Yep, Snow is running smooth as ever. Good work Access : )
________
sativa strains (http://strainindex.com)

[cl516]

This is reflected in HI now...

I really didn't wanna post, but what does that mean?

And is that the way it WAS or... now it's like that?

[marc]

This is reflected in HI now...

I really didn't wanna post, but what does that mean?

And is that the way it WAS or... now it's like that?

haha - guess i should have edited this sentence, real germanenglish brought to you directly by one of our developers. i guess what he means is that now those parameters cannot be accessed anymore when using those particular algorithms. before you were able to change them but they didn't do anything.

HI means Hardware Interface btw.

hth, marc (the real napster)

[luke4421]

YES!

Access is a class act

[DeFex]

Cant get to this till tomorrow, did they fix where you cant modulate any of the new types of delay on effects page?

[Pighood]

Here we go again...doesn't work on my Mac. Software updated OK, but the installed thought there was no Virus attached to the Mac. When trying to launch VIrus control, I got the "hardware/software mismatch" message. :(

[cl516]

mine works as a standalone unit.

mac installer worked. recognized my TI (1) desktop.

and yes, now next to Vintage 1, 2, 3, there are no parameters.

[cYrus]

Here we go again...doesn't work on my Mac. Software updated OK, but the installed thought there was no Virus attached to the Mac. When trying to launch VIrus control, I got the "hardware/software mismatch" message. :(

same problem here :(

but finally after 15 times "reinstall drivers" it worked on my windows vista system. it's the same problem with the first public beta. with all previous 2.x releases it never happened.

[Totty]

Installed fine, have to wait to tomorrow to let rip:D

[civan]

So do we need to download and install the latest software from the website in order to update to OS 3.0.1? I thought the update software on the Mac/PC would update the OS automatically when it detects the Virus TI... could someone please clarify.

[Pighood]

I emailed Matt Skaggs...no answer yet.

[Chicago]

Here we go again...doesn't work on my Mac. Software updated OK, but the installed thought there was no Virus attached to the Mac. When trying to launch VIrus control, I got the "hardware/software mismatch" message. :(

Works swimmingly here. Updated first go without issue.

[djmac]

Here we go again...doesn't work on my Mac. Software updated OK, but the installed thought there was no Virus attached to the Mac. When trying to launch VIrus control, I got the "hardware/software mismatch" message. :(

Same problem here. It does not recognize my macbook pro G4 either. Try the 'All cables off and return with the 'Exit' hold button . Did not work. Any solutions?:?

[midislut]

this OS 3 is a complete f uck up


i wasted a whole day to try and get it back to OS 2

[cYrus]

just went back to 2.7.5.

3.X is very unrealiable here. i get a lot of time the "not connected" or the "audio driver failed to start" messages. 2.7.5 is rock solid here.

[Splat!]

It's still a Public Beta, so be patient!
________
Ford Zephyr engine specifications (http://www.ford-wiki.com/wiki/Ford_Zephyr_engine)

[Chicago]

this OS 3 is a complete f uck up


i wasted a whole day to try and get it back to OS 2

Maybe you could expand on your statement, then people might be able to help you.

Just a thought.

[IamEvil]

OS 3 was a pain in the arse on mine too.

I swapped the USB cable with one from my midex 8 and it has worked great... worth a shot on a different usb cable

[Pighood]

I tried that....no go.

[Totty]

Just noticed that in Logic 8 on Mac Pro 8 Core, Logic is reporting 100% cpu on one core. I noticed that when I switched core audio driver to MOTU 828MK2 or internal audio, cpu usage dropped. I don't know if this something Virus related.

[glenn303]

Ive been running 3.0.1 for about an hour on my Snow in Live 8b.14 and its been smooth, no problems yet.

[zeno]

Everything is a go here. Not sure if it's me, or something else, but some of my sounds made in 2.x sound a little different in 3.0.

Not a big deal though. The features in 3.x are super. Now if we could just tie LFO rate to the mod-wheel while in clock mode.

[Raphie]

Super stable here... best release yet!

[Cantankerous]

Ive been running 3.0.1 for about an hour on my Snow in Live 8b.14 and its been smooth, no problems yet.

Mate. Call me crazy, but is that guy in your Avatar the same dude from the Sham Wow commercials?!:p

[fgimian]

I installed this tonight, and it looks and sounds amazing. Only 1 main bug / problem that I've noticed on PC Cubase 4.52 (and a fellow producer I know on Mac / Logic 8 says he's seen it too)

Problem:

After some time of using VC, and performing certain actions (I can't determine exactly what yet), moving many knobs on VC with the mouse does NOT affect the sound (e.g. Punch Intensity, Dry/Wet of Phaser, Distortion type). On the other hand, moving the knob on the hardware, does affect the sound. Has anyone else seen this?

Solution:

Restart VC

Also I posted a question in another topic but I may as well ask here, how exactly can one switch the patch volume to be pre-effects like in v2? If this has been set to post-effects with no options, doesn't this mean that any patches involving patch volume modulation from v2 will sound different in v3? I certainly used to do patch volume modulation in v2 and am worried those sounds will sound different now.

Finally, I have some feedback regarding the interface of VC in v3:
- I really dislike the gradients on the envelopes, it looks completely out of place. A very soft gradient or even solid colour would look much better to be honest.
- (Also in v2), I notice that when you are in Wavetable mode for an oscillator, there's no easy way to browse through the wavetables without getting a popup list which you have to choose from, there is no way to just go to the previous and next wavetable. Any plans to make this easier to do with the mouse?
- I think the patch selection page would look a lot better with darker background and bright text, it looks messy / too hard on the eyes with a white background. This will also be a nice contrast to the generally bright look of the entire plugin.

Thanks!

[00264167]

v3.0 installed ok for me but v3.0.1 stalls about two thirds of the way through...unless its supposed to take 30minutes+ without the status bar moving

update:- it seems to be ok after the installer is extracted to the hard disk, looks like it cant progress to the firmware update if its being run from winrar or winzip

[Ronkaz]

update:- it seems to be ok after the installer is extracted to the hard disk, looks like it cant progress to the firmware update if its being run from winrar or winzip

running things directly from a zip is file is never a good idea, I think even Windows says not to do so....

r

[00264167]

i got to say this seems like a step backward to me (v3.0.109), three crashes in two days since the new install resulting in no sound at all from the ti in ableton and the virus has to be rebooted to communicate with ableton again. i might go back to v3.0 :mad:

[00264167]

balls...theyve taken all the older os3 versions off the access download page and ive deleted v3.0 a few weeks ago. i dont want to be having to use this buggy p.o.s (v3.0.109) that crashes ever hour.

anyone got the installer for v 3.0?