O.S. 3.0.10 is out!

[Matt van k]

Wish you a happy eastern:)


http://www.access-music.de/downloads.php4?product=virustidesktop#cat18

[anton]

Here it's a disaster, USB conflict with other devices. No problems in previous version.
(Mac os x 10.5.6-MacPro late 08 -Logic 8.0.2)
-A

[anton]

Back to 3.0.9 all fine.

[marc]

Here it's a disaster, USB conflict with other devices. No problems in previous version.
(Mac os x 10.5.6-MacPro late 08 -Logic 8.0.2)
-A

what do you mean exactly?

marc

[FFoxX]

Virus TI plugin v 3.0.1.10 doesn't work in Cubase SX 3.1.1

[anton]

what do you mean exactly?

marc

I mean a USB conflict message with other devices connected to my computer appear when Logic is come up. Try to change the usb connection putting Snow on the self powered hub or on the back usb ports but the conflict is still on.
Back to previous version solve the problem.....this problem...not the others....but that's another story.....
-A

[Raphie]

Virus TI plugin v 3.0.1.10 doesn't work in Cubase SX 3.1.1did you load the vst3 version?

Mark the arp function did not work inthe vst3 09 version, is this fixed?
also can you create an "enable ARP note out" button next to the hold button? so you can select this from the DAW rather than the TI synth itself?

[FFoxX]

did you load the vst3 version?


I have installed only VST2 plugins. Cubase shows only Virus TI Snow plugin, it doesn't load the Virus TI plugin. When I open Plug-in Information window, the Virus TI line is brown and it shows only name and path of the plugin. Virus TI Snow plugin is displayed normaly.

[marc]

I mean a USB conflict message with other devices connected to my computer appear when Logic is come up. Try to change the usb connection putting Snow on the self powered hub or on the back usb ports but the conflict is still on.
Back to previous version solve the problem.....this problem...not the others....but that's another story.....
-A

going back doesn't solve your problem, 3.0.1.09 just doesn't display an error message because the error message wasn't implemented in older builds. the problem you are having was there the whole time. also you're talking about other problems. can you elaborate?

please contact access support and let them help you.

thanks, marc

[Cantankerous]

did you load the vst3 version?

Mark the arp function did not work inthe vst3 09 version, is this fixed?
also can you create an "enable ARP note out" button next to the hold button? so you can select this from the DAW rather than the TI synth itself?

Unfortunately this can't happen. I asked Joerg at Access about having a button to toggle ARP NOTE SEND from within VC, instead of the synth itself, and he said it can't be done due to that setting being a global setting for the synth itself??

I thought it would be much easier as well to handle everything while you are already on the page, but alas I will not hold my breath for that to be implemented.

Strange as well how the ARP NOTE SEND can only be done on odd number parts to boot. Another confirmation from Access that this is a hardware limitation. No clue why, but they are aware of this and state it is normal behaviour.

[telson]

dear Marc
i faced exactly the same problem with Sonar 8.3.1
after installed 3.0.1.10 , and the time i try to load Virus TI vst plugin , Sonar cannot load it , and it crash badly :(:(:(

[7G]

Live 8.0.1 doesn't like Version 3.0.1.10 either...
Keeps crashing on loading...
Also on Live 7.0.15 gui is gone bye bye...

[telson]

back to 3.0.1.09 , and everything works fine again ;)

[cl516]

Is the Tape Delay fixed?

[00264167]

yep, the virus control wont even open with ableton 6 :mad:, it just leaves the blank display where the vc should be,..... jesus why cant they just release a stable version3 that works instead of all these messed up betas. now it doesnt even work, leaves you thinking they cant have even tested it with the most widely used sequencers.

so ill be going back to 3.0.109 but even that didnt work properly for me and kept crashing in ableton. version3.0 was the only decent one i had , does anyone have the installer for it, i deleted it but now i need it again.

[plaid_emu]

I'm using VC with Live 7 and a desktop TI and it keeps crashing when I change patches with a mouse click. Mac OSX 10.4.11

[00264167]

god knows what 3.0.110 has done but now i cant get the vc gui to display after ive reinstalled 3.0.109. if it doesnt work after i restart my my then this new version has really screwed things up.

[anton]

"....going back doesn't solve your problem, 3.0.1.09 just doesn't display an error message because the error message wasn't implemented in older builds. the problem you are having was there the whole time."

Maybe you right but in 30109 i dont get crashes.


"also you're talking about other problems. can you elaborate?
please contact access support and let them help you.
thanks, marc"

Doit, thanks.
-A

[FFoxX]

Virus TI VST plugin version 3.0.1.10 is definitely messed up. 3.0.1.06 is the best for me.

[00264167]

Virus TI VST plugin version 3.0.1.10 is definitely messed up. 3.0.1.06 is the best for me.


yes thankfully after doing add/remove programes to remove it then reinstalling 3.0.109 i can get thew gui to display again. i would advise everyone to avoid this update unless youve got major problems with the previous ones.

[Cantankerous]

Strange you are all having issues. In Cubase 4.5.2 it is working just fine. Been using it off and on all day.

[peke]

Same here....i use flstudio on my laptop and virus snow connected to it.... For me it works even better than 3.0.1.06. ...but if there comes something up i'll let u know, Happy easter
/Pekka

[HUEY]

Same here
I Use Cubase SX3, XPsp3 with Ti Desktop and the VC plugin is working without problems.
I still do have the problem that the Virus Crashes when selecting sounds during play, like all the other 3.0 beta versions. I never had that with all the prvious versions (since 2.02)

[telson]

very strange really
i have done all access updates
but only with 3.0.1.10 i had major problem :(

[00264167]

maybe its only got problems with sonar and ableton

[Ronkaz]

Same here
I Use Cubase SX3, XPsp3 with Ti Desktop and the VC plugin is working without problems.
I still do have the problem that the Virus Crashes when selecting sounds during play, like all the other 3.0 beta versions. I never had that with all the prvious versions (since 2.02)

what kind of crash?

r

[Dunkler Engel]

Works fine for me. I did get the USB conflict thing for the first time, but as Marc said it was a problem that was there before and is now reporting it. Switched the TI to the other USB port and the message went away.

No problems to report so far.

MacBook Pro, Leopard 10.5.6, Logic 8.0.2

[kolektor1]

well there s a lot of updates lately , this one was fine for me , i m using live 8 running on windwos server 2008.

only the first beta 3 os was buggy here, stuck sound n no vc but since all is fine now :p

[HUEY]

what kind of crash?

r

When switching sounds during play, I often get a "synchronisation is lost" error. When I stop the sequenser, sometimes the error is solved then, but once in 3 or 4 times average, I do this, There is a very hard sound/noize comming out of the virus, and it is completly dead. It responds to nothing anymore and I have to rebooot the virus

[7G]

well there s a lot of updates lately , this one was fine for me , i m using live 8 running on windwos server 2008.

only the first beta 3 os was buggy here, stuck sound n no vc but since all is fine now :p

Strange i use Live 8 and can't even open VC...It keeps crashing
How did you do your setup?Did you made a fresh install or there was a previous OS?

[FFoxX]

Same here....i use flstudio on my laptop and virus snow connected to it.... For me it works even better than 3.0.1.06. ...but if there comes something up i'll let u know, Happy easter
/Pekka
The Virus TI Snow VST plugin works, but Virus TI VST not.

[Chicago]

Strange i use Live 8 and can't even open VC...It keeps crashing
How did you do your setup?Did you made a fresh install or there was a previous OS?

I just updated to 3.0.1.10 and Live 8.0.1 and VC opens no problem. I have a previous OS installed and just updated to 3.0.1.10 straight away.

[filiphdan]

When switching sounds during play, I often get a "synchronisation is lost" error. When I stop the sequenser, sometimes the error is solved then, but once in 3 or 4 times average, I do this, There is a very hard sound/noize comming out of the virus, and it is completly dead. It responds to nothing anymore and I have to rebooot the virus

This is happenning to me too since i got the access virus ti 2 , it happened in the VC in logic pro and also using it normaly just connected whit audio cables, i´m going to return it since i just bougth it a month ago and i think this is a malfunction unit...

[7G]

I just updated to 3.0.1.10 and Live 8.0.1 and VC opens no problem. I have a previous OS installed and just updated to 3.0.1.10 straight away.

Any other Ableton users here wanna share their experiences?


The Virus TI Snow VST plugin works, but Virus TI VST not.

Hmmm...I'll try to investigate this

[marc]

i've just tried to open VC 3.0.1.10 in live 8.0.1, live 7.0.15, logic 8.0.2, logic 7.2.3, cubase 5.0.1 and cubase 4.5.1 (all on a MacPro 8 Core 2008). every single time it opened fine, displayed the GUI and played back the corresponding tutorial song.

if you discover crashes, please contact support and send a crash log. also, please post more details about your system. in general, post more details on your findings please.

thanks, marc

[7G]

Ok found it,

Well,all problems seem to start when i have TI pluged and launch Live...
But if i first launch Live and then plug the TI all things look good
Same thing both on my PC & Mac...
The only differnce is that on PC if i try to open a recent project the VC
crashes Live on load

An audio drivers conflict maybe?

Any ideas?

[reflective]

very strange really
i have done all access updates
but only with 3.0.1.10 i had major problem :(

Me too. VC crashes Live 8.0.1. VCC can't "Talk to Virus...", it recognizes my TI but crashes without any notice when I press O.K. to start communication.
Strange too: I can use VC 3.0.1.10 in Live if my TI has OS 3.0.1.09 but crashes with OS 3.0.1.10:confused:

Now I went back to OS 3.0.1.09 where my world is O.K.(Using VC 3.0.1.10):)

In my opinion this bugfix is rather a bug than an improvement:
Change Log 3.0.1.10 -VC / VCC: detection of USB hub device conflicts (added)

If only VC causes problems I would search the failure by myself... But VC and VCC... Access Music, it is your turn!

Live 8.0.1
WINXPSP3 DualCore E6600
VirusTI MKI

[7G]

Back to OS 3.0.1.09 for me is working great...
Let's hope Access fix this..

It must be the full moon..:)

[zeno]

Just installed on a new I7 2.6ghz Quad with 6 gigs of ram in win xp (would have gone vista 64, but you know. Wasting memory...)

So far everything is good. Though every now and then, I hear this loud Shreek come out of the TI. and it kind of resets, all my patches are all screwed up volume wise, and everything is outa sync. Reloading the project in live seems to solve the probelm.

It only happens every so often, and I have not been able to find it's cause or replicate.

[civan]

if you discover crashes, please contact support and send a crash log. also, please post more details about your system. in general, post more details on your findings please.

thanks, marc

Marc, where exactly do you want us to submit bug reports? There's just a general support section on the access site. Nothing specific to Virus problems.

[civan]

My Virus Polar TI|2 is crashing all over the place. Whenever I try to change a patch in the browser, Cubase 5 crashes. It could be Cubase 5 that's the problem though. Another bug I noticed is that the OS3 beta splash screen always shows up even though I click "Don't show again." Also, randomly I'll get a load high pitch shreek coming from my speakers. I have a feeling the Virus is causing it because it was the only instrument loaded at the time.

[looper]

Hi,

Since loading .10 I can't get the vst plugin to load at all in FL 8.0.2 - just bombs out with "access violation and a memory address". Everytime.

The stand alone admin tool from the menu loads, detects the TI ok and then also gives the same error.

The TI is on a dedicated usb port and worked fine with release .6 - didn't try .9 and went straight to .10. In hindsight I probably wish I hadn't bothered!

I am sure it will get fixed and am still grateful to Access that they provide such major updates free of charge.


Hope this helps.

[Raphie]

The plugin window does not occur bug from 3.01 s back....

load an empty Cubase 5 project, it all works fine, load 5 instances of REV-X, the TI control window will stay gray and not redraw, same test in 3.06/9 works fine.

[rsformatc]

VC is blank for me too in Cubase Studio 4.5.1 with 3.0.10. Tried exisiting and new project with both VST3 and VST2 and no joy.

[DiScO]

Hi all,

This release is crashing Logic when switching patches in the VC for me. Guaranteed every time without fail. Any other mac users with the same problem?

Cheers.

[limlo]

Hi all,

This release is crashing Logic when switching patches in the VC for me. Guaranteed every time without fail. Any other mac users with the same problem?

Cheers.

here too !!!

[7G]

Wow...
Seems this is the worst version ever!

[civan]

Remember people, this is just a beta. So we can't expect a version that is somewhat solid until 3.1 is released or something. This is just the nature of software coding... fixing existing bugs or writing new features will induce new bugs. I rolled back to 3.0.09. I can continue working on my tracks for now like this.

[Pighood]

Hi all,

This release is crashing Logic when switching patches in the VC for me. Guaranteed every time without fail. Any other mac users with the same problem?

Cheers.

That's why I'm still on .05

[DiScO]

Yes, I like to tinker and try the latest releases, but this one is particularly bad as it makes the whole thing unusable in Logic. I'll just switch back until it's sorted.

Cheers for confirming all.

[DiScO]

Yes, I like to tinker and try the latest beta releases, but this one is particularly bad as it makes the whole thing unusable in Logic. I'll just switch back until it's sorted.

Cheers for confirming all.

[justmcg]

Hi all,

This release is crashing Logic when switching patches in the VC for me. Guaranteed every time without fail. Any other mac users with the same problem?

Cheers.


Same exact problem! Not really surprised either.

[Dunkler Engel]

Hi all,

This release is crashing Logic when switching patches in the VC for me. Guaranteed every time without fail. Any other mac users with the same problem?

Cheers.

I cannot confirm this... Tried to duplicate and not having this problem. Opened the VC up in new project and switched back and forth through a bunch of patches. No crash. Tried in an existing project and still no crash...

Penryn MacBook Pro, Leopard 10.5.6, Logic Pro 8.0.2, Virus TI Desktop 3.0.10

[aye_carrrumba]

I cannot confirm this... Tried to duplicate and not having this problem. Opened the VC up in new project and switched back and forth through a bunch of patches. No crash. Tried in an existing project and still no crash...

Penryn MacBook Pro, Leopard 10.5.6, Logic Pro 8.0.2, Virus TI Desktop 3.0.10

i also am having no problems. loaded 3.0.1.10 tonight, and so far it crashed only once, the first time i changed patches. but has been working fine since then, and changing patches / tracks in logic with no problems.

imac, intel core 2 duo 2ghz, leopard 10.5.6, logic pro 8.0.2, virus deasktop 3.0.1.10.

[aye_carrrumba]

i guess i spoke too soon. i took a break for awhile, and upon returning, changing patches and tracks is crashing my system also. but i will try a few more things before i backload to previous ver., since i had it working for awhile, it coud have been sleep mode just messed it up, or something else.

[djones]

Ok here's the problems I'm experiencing on both 3.0.09 and 3.0.10 with Cubase SX 3.


Completely out of sync when playing back
Sounds get ducked away by other sounds, when using multiple channels
Hanging notes when mutiple channels are playing and when changing presets
Clicks and pops
Sounds continue co play although its channel has been muted

[marc]

okay, i cannot make it crash, no matter what i try. could somebody please send me a crash log to ms [@] access - music . de ?

thanks!

marc

[telson]

dear marc
what about the vst loading issue ?
did you try to load it as a vst plugin from a DAW ?
i did it from Sonar 8.3.1 and it crashed badly
i think this is also a very important case to investigate

using 3.0.1.09 no problems at all
greetings

[DiScO]

Seems some are crashing and some not. Just to confirm my setup, I use a Mac Pro 3Ghz 8 core, 12GB RAM, Logic 8.0.2, Leopard 10.5.6 with RME FF800 and MK1 TI Keyboard. I went down to .09 yesterday, works fine, but I'll put .10 on again later and send the crash log.

Cheers.

[marc]

dear marc
what about the vst loading issue ?
did you try to load it as a vst plugin from a DAW ?
i did it from Sonar 8.3.1 and it crashed badly
i think this is also a very important case to investigate

using 3.0.1.09 no problems at all
greetings

please send a crash log, it doesn't crash here.

marc

[Djamel]

Hey. Wouldn't post all that often but felt compelled to after installing 3.0.1.10 beta. The update really, really made shit of things on my mac. Every time without fail when loading up a preset though the vc (Through both Ableton live 7 and logic 8 ) A crash would occur.

I have since installed .09 beta and things seem ok now. Lesson learned, come to the forum first and see how others got on with it first. If crash logs etc. are needed I'd happily oblige if it helped to iron out these bugs.


Cheers
Djamel

[7G]

please send a crash log, it doesn't crash here.

marc


Ok done,
I've just sent you my crash logs Marc...

Ah, and one other thing that's buging me from version 1 drivers:

"When i plug TI from power for 30 secs and then plug it back in and try to
power it on it pops me the plug n play installer like i've never installed TI's drivers..."

Is this normal?Can anyone reproduce it?

[Chrisoctane]

yup, I've got the patch change crash too! I'm also completely unable to use the vocoder. Vc just crashes logic.

Another issue on every version.. Has anyone else had an issue where some patches don't load correctly with a song? I find quite often that filters or lfos sound different when I reopen a project, reloading the patch (providing it's saved) from the browser sorts it but I'm sure it's a bug??

Mac pro 2008 octo 6g, logic 8.02, tios 3.0.1.10

[digitalgeist]

Whoa. Glad I read this thread here first. Sticking to .09 for the time being, no offense Access!

[looper]

please send a crash log, it doesn't crash here.

marc

From a XP pro , 2gb RAM core2 E8400 and FL Studio 8.0.2. pc -

Faulting application virus control center.exe, version 3.0.1.10, faulting module virus control center.exe, version 3.0.1.10, fault address 0x0000ed87.

All was good (not perfect but getting there!) with .06.
All is very bad with .10

Thanks.

[marc]

here's some news:

we can replicate the crash when browsing through patches and we can reproduce the white window syndrome on one PC. it might be that the patches loading with wrong settings will be solved with solving the crash bug but that needs to be determined.

apologies for version 3.0.1.10, especially to TI2 users who cannot roll back to 2.7.5 - we hope to have news this week.

best, marc

[ehunter]

how is the easiest way to revert back to 2.7.5 for a virus snow user?

[grs]

Ok done,
I've just sent you my crash logs Marc...

Ah, and one other thing that's buging me from version 1 drivers:

"When i plug TI from power for 30 secs and then plug it back in and try to
power it on it pops me the plug n play installer like i've never installed TI's drivers..."

Is this normal?Can anyone reproduce it?

Yes, since I can remember. I'd say its like 50% of the time from power on of the Virus TI if computer is already on. Usually the TI doesn't come to life, no boot cycle on the machine, then windows says 'new hardware' and attempts to find drivers. I just unplug power from TI, cancel windows driver attempt and re plug power, usually fixed every time. Maybe Access needs a 'safe to remove hardware' option in windows.
I know if I turn off my RME FF800 I can crash my computer to instant reboot, only if I use "safely remove hardware" option in windows can I turn off my FF800.

[7G]

Yes, since I can remember. I'd say its like 50% of the time from power on of the Virus TI if computer is already on. Usually the TI doesn't come to life, no boot cycle on the machine, then windows says 'new hardware' and attempts to find drivers. I just unplug power from TI, cancel windows driver attempt and re plug power, usually fixed every time. Maybe Access needs a 'safe to remove hardware' option in windows.
I know if I turn off my RME FF800 I can crash my computer to instant reboot, only if I use "safely remove hardware" option in windows can I turn off my FF800.


Exactly!
That's how i do it too...

Access please we need something like "safely remove hardware" for us
who have all our gear hooked up on a main power switch and like to turn
it off at nights when we go to sleep to rescue our last brainwave cells...hehehe:)

[reflective]

Thank god, access removed the faulty version 3.0.1.10 from their download page. This is a concrete answer to my support request...:D

I hope the next 3.0.1.10 will cause less troubles...

[djones]

Is that 3.0.10 version currently on the site now, different that the other 3.0.10 version?

As well, I saw version 3.0.05 appear on the site yesterday.
Haven't seen that one before:confused:

[reflective]

Don't know which page you are monitoring, on the page I visited today there is no 3.0.1.10 any more. 3.0.1.09 is the most recent now.

www.access-music.de/downloads.php4?product=virustidesktop

[hugo]

Don't know which page you are monitoring, on the page I visited today there is no 3.0.1.10 any more. 3.0.1.09 is the most recent now.

www.access-music.de/downloads.php4?product=virustidesktop

Had the patch change crash problem with 3.0.1.10 and have gone back to 3.0.1.9 which was fine for me before.

Patch change only seems to happen for me if I select a patch from a user library. If I use a ROM bank no problem, Thought it could be a helpful point? Anyone else experience the same??

[~BHG~]

I mean god forbid Access trys to make your work experience more enjoyable by trying to update the hardware! I mean c'mon if it was roland you would have to spend a zillion dollars just to get some crappy update or manual or add-on, and a zillion hours just to find it! And most other manufacturers are like this is all you get! Thanks for giving us $2000, You seen the new Roland gear?? Garbage!!! It's not that hard to realize the word BETA in the update!

If you dont want to help get the BETAS propperly working go back to the real release and stop the crying!


Marc you guys got your shit right and I'll sit and work with whats available G!!

[~BHG~]

Personally I cant wait to get my 3rd and 4th TIs so I can run all 4 on my JazzMutant and multi network! Just sayin live synths is where its at!:)

[Raphie]

+1 VERY impressed with support and velocity of updates, happy to try some more. 3.010 was a bit of a miss, but i am pretty sure 3.011 is going to show real progress. I find tremendous value in my TI with V3 SW, THANK YOU for that! please stay on the ball with the blank VSTi window. it now showed in 10 but i had it in 001 and 003 as well.. (006 and 009 were perfect)

[marc]

+1 VERY impressed with support and velocity of updates, happy to try some more. 3.010 was a bit of a miss, but i am pretty sure 3.011 is going to show real progress. I find tremendous value in my TI with V3 SW, THANK YOU for that! please stay on the ball with the blank VSTi window. it now showed in 10 but i had it in 001 and 003 as well.. (006 and 009 were perfect)

thanks for saying that. some times back, we debated with users if it's better to put out betas fast, to cure little problems, than wait and collect bugs. okay, we found that frequent betas are welcome but also there is a chance to release a bad one - because we simple don't have the time to test a beta with the same level of detail. i guess, now it's down to us to get the mix right.

best, marc

[Raphie]

3 out of 10 being a bit of a dud is not a bad score :)

What i found in 10 as well, is that it seems that the USB driver is claiming an interupt differently? I also have a SSL Duende PCIe and since 10 i needed to do several reboots before it's properly initialized, never had that problem before. dunno if this is related, but the behaviour change was definately tied to installing 3.0,10

[LivePsy]

thanks for saying that. some times back, we debated with users if it's better to put out betas fast, to cure little problems, than wait and collect bugs. okay, we found that frequent betas are welcome but also there is a chance to release a bad one - because we simple don't have the time to test a beta with the same level of detail. i guess, now it's down to us to get the mix right.

best, marc

Please marc keep in mind that for every post with a bug there must be hundreds of people who have no problems with the betas. Ever since 2.5 (maybe earlier) the OS has been great for most of us.

Cheers,
B

[telson]

of course boys
no hard feelings at all for Access or Marc
they are trying the best for all of us
just think how reliable are other companies to their customers ;)

[ehunter]

I had to revert back to 2.7, I cant get live to work with the OS 3, keeps crashing it often when switching patches

[looper]

thanks for saying that. some times back, we debated with users if it's better to put out betas fast, to cure little problems, than wait and collect bugs. okay, we found that frequent betas are welcome but also there is a chance to release a bad one - because we simple don't have the time to test a beta with the same level of detail. i guess, now it's down to us to get the mix right.

best, marc

Got to reiterate that the beta offerings are hugely appreciated and like many others more than happy to be part of the development cycle. Any moaners and I got to ask who exactly is forcing you to try this beta code anyway ? Nobody. There is always a way back if things go a bit adrift.
As an original TI owner Access could have cut out future upgrades a while back like other manufacturers often do - but they didn't. Every credit and many thanks. Top product - top support. Keep it coming.
OK, fine, so where is .11 then? :wink:

[soundsubs]

I wanted to chime in and say that the new OS is working for me with Sonar 8.3.

Everything is fine and stable for me.

[00264167]

just to put my mind at rest, none of the updates actually change the sound of your stored presets do they?
sometimes when im switching between all these betas then listening back to a project its difficult to compare if its exactly the same sound as in the previous version.

[HUEY]

Had the patch change crash problem with 3.0.1.10 and have gone back to 3.0.1.9 which was fine for me before.

Patch change only seems to happen for me if I select a patch from a user library. If I use a ROM bank no problem, Thought it could be a helpful point? Anyone else experience the same??


I can confirm this!! Same here

WinXPsp3, SX3, Ti Desktop

[reflective]

Got to reiterate that the beta offerings are hugely appreciated and like many others more than happy to be part of the development cycle. Any moaners and I got to ask who exactly is forcing you to try this beta code anyway ? Nobody. There is always a way back if things go a bit adrift.
As an original TI owner Access could have cut out future upgrades a while back like other manufacturers often do - but they didn't. Every credit and many thanks. Top product - top support. Keep it coming.
OK, fine, so where is .11 then? :wink:

Not to raise fears, I am not angry about access music I'm rather thankfull to them for providing us these updates. So my posts are not complaints, I only try to find solutions and share my experiences with others.
.11??? I think the next version will be .10 again because they removed .10 from their downloads. In my opinion the former .10 has got a major bug otherwise they haven't backtracked it.

[HostileReality]

just to put my mind at rest, none of the updates actually change the sound of your stored presets do they?
sometimes when im switching between all these betas then listening back to a project its difficult to compare if its exactly the same sound as in the previous version.

they do sometimes!! I am quite weary of trying new updates now because of this. i have some history with the sounds changing. Firstly, I had made some sounds when i first bought the TI, then when i updated, they went all messed up- apparently it was down to the lfo's changing the way they worked or something, but either way i had to adandon these sounds as the only workaround was to go back to the original firmware driver. Then a similar thing happend much later, after updating the virus, and again supposedley it was down to some bug, but now the sound i use in this particular song sounds out of tune. so thats another one i've had to give up on (actually im gunna go back to that one at some point). Recently I tried one of the new beta's and it seemed fine, but then i noticed in one particular song one of the sounds had changed slightley, so i reverted back and it was back to normal.

Oh, then there was the time when some patches for some reason wouldnt save properly in VC, and would load up again with slightly differnt cuttoff or other settings, though this only happend a couple of times and wasn't too major.

And finally!!! today the latest successor, I find that cubase 5, when i save the song, then re-open it, the virus patch sounds different. This is with a song made in SX3, and now that i have upgraded to Cubase 5, I load the song and all sounds as it should, but as soon as i save the song, then re-open it, the virus patch sounds wrong.

So... yeah, be warned! it can happen. :cry:

[Larrikin / Harmless Prank]

i run Logic 7 on OS X 4
never really had any major issues with the old VC , but since version 3 it causes all sorts of problems :(

[wehurlbert]

I think its GREAT that Access put out the betas. It is extremely helpful.
For those who don't like the heat, stay out of the kitchen until its fully baked.

Sheesh! Its a freakin' BETA guys; in case you don't known what that means,
it means not-finished-and-may-be-buggy.

But a lot of us like to work with new software, and help our favorite synth
maker improve things. If you don't, stay on 2.7.5 and be happy!

[HostileReality]

Btw i also think that it's great that they do put out betas, and access are great, and they give great support to their users and free upgrades and stuff. Not that your post was directed at me in particular, I was just stating my experiances that's all.

[josefz]

Ditto here, both Live and Logic crashed w/ .10,...back to .09

[DiScO]

Got to reiterate that the beta offerings are hugely appreciated and like many others more than happy to be part of the development cycle. Any moaners and I got to ask who exactly is forcing you to try this beta code anyway ? Nobody. There is always a way back if things go a bit adrift.
As an original TI owner Access could have cut out future upgrades a while back like other manufacturers often do - but they didn't. Every credit and many thanks. Top product - top support. Keep it coming.
OK, fine, so where is .11 then? :wink:

Absolutely. I think it's fantastic to see software rolling out like this, beta or not. As you said, no one forces you to download it! I always receive a reply from tech support in lightning fast fashion when reporting bugs with these betas so the situation couldn't be anymore perfect really. What annoys me is when a company releases software that does not work 100% and does not update it for several months and does not communicate with the end user.

Cheers all.

[luddy]

3.0.10 seems to be quite stable in standalone mode ...

-luddy

[cl516]

I missed out on .10
apparently they fixed the tape delay in that one?

i only use my TI2 in standalone mode, I want the .10
when's the next update gonna be posted...

[TheHobbit]

Hopefully we will see 64Bit support in the not too distant future!?

Any news yet please?

[Zork]

There is no 64 update in planed by access..we talked to the support and he told us..

they even don`t know if there will ever be one..

damned...

[zeno]

There is no 64 update in planed by access..we talked to the support and he told us..

they even don`t know if there will ever be one..

damned...
:confused: