Audio Driver Failed!

[djones]

I'm having some problems with one of my current projects.
In which it won't load my Virus anymore.
I get this error, 'the audio driver failed to start or is not installed etc....'.

But if I start other projects I have no problems at all.

But what can I try to get it working again in this project?
I've tried removing the Virus from this project, saving it under a different name and then reopening it, to then add the Virus into my project.
That worked fine.
But when I saved it again, including the Virus and reopened the newly renamed project, then again it wouldn't load.

[pitch.killer]

Pretty same problem here...
new project > virusTI seems to be ok > quit cubase > pc reboot > open cubase > virus not working in this project

I'm gonna crazy....

Stefano.

[sawtooth]

I got a new computer (imac quad core) and am getting that error too. are you running a mac with snow leopard...

[pitch.killer]

I'm working on intel q6600 and winXp...

It seems to be a usb driver issue...

[Cantankerous]

Strange, I had this same problem just this past weekend when fooling with some new projects. I encountered the problems while trying to use the Virus as an insert FX but none the less it would load hit and miss with the Audio Driver Failed issue and I would be asked to try and restart the Virus or reinstall the software.

[pitch.killer]

same thing... after a driver reinstallation it seems to work, then after a pc reboot it doesn't work again.

I'm writing with access support, because this situation is gonna really weird!
i've some "old" projects (filled with any kind of vst instruments and processing) that work flawlessy.... but new projects don't!
The really really weird thing is this:
- open cubase and the new project created the day before, it doesn't work
or
- open cubase, the "old" project, then close it and open the new one... it works!

no differences between projects setup (bitrate, sampling frequency, panning law, ect.)... moreover i get the same problems with new projects when virus control ONLY has been loaded (no vst instruments or fx).

Should i go for an exorcism?! :D

Stefano.

[feedingear]

Might sound crazy - buy a new USB cable and see if it helps.

[pitch.killer]

Might sound crazy - buy a new USB cable and see if it helps.
It doesn't sound crazy, just tried but no results.
I've tried a different usb port too (normally virusTI is cabled with a pci/usb card, so i tried the motherboard integrated usb), no results of course :D

Maybe i'm wrong, but i'm still trying to understand if there are differences between the old project and the new ones! Cannot find any!

omg.... :D

Stefano.

[djmac]

I'm having some problems with one of my current projects.
In which it won't load my Virus anymore.
I get this error, 'the audio driver failed to start or is not installed etc....'.

But if I start other projects I have no problems at all.

But what can I try to get it working again in this project?
I've tried removing the Virus from this project, saving it under a different name and then reopening it, to then add the Virus into my project.
That worked fine.
But when I saved it again, including the Virus and reopened the newly renamed project, then again it wouldn't load.

Yeah same problem here. I also have the new quadcore iMac with snow Leopard. I'm in contact with Access support and tried a suggestion which that I had to take out all the cables out from the Virus Ti and the main power also and switch back in with the Arp+edit button to reboot the Ti but it did'nt solve the issue. Lets see if we get some new update or some solution from access. Good luck everyone.

[suzzymackenzie]

I encountered the same problem yesterday. I had been working without problems on a Cubase Studio 4 project with a single virus VST channel. When I deleted some other tracks and saved the project to another folder, and opened that project next time around, it was then that Virus Control failed to load up. In older projects, however, VC worked fine.

Neither arp edit reboot nor reinstalling the driver seemed to make any difference by themselves. What worked was then to remove the Virus track from my newly saved project, and then add a new Virus track.

Puzzling...

[sawtooth]

Yeah same problem here. I also have the new quadcore iMac with snow Leopard. I'm in contact with Access support and tried a suggestion which that I had to take out all the cables out from the Virus Ti and the main power also and switch back in with the Arp+edit button to reboot the Ti but it did'nt solve the issue. Lets see if we get some new update or some solution from access. Good luck everyone.

yeah, we have the same set up/same problem. I'm just going to be patient and wait for the new os (whenever it may come)

[Osmodiar]

is everyone with this problem using the beta OS 3.3.0 ?

i get it occasionally aswell but it seems to happen when i close a project which was using the TI, and then open a new project with a TI in it. If i close down cubase fully and then open the new project with the TI in it it usually works.

worth reporting i think so they know it needs to be worked on before the beta goes to release status.

[marc]

is everyone with this problem using the beta OS 3.3.0 ?

i get it occasionally aswell but it seems to happen when i close a project which was using the TI, and then open a new project with a TI in it. If i close down cubase fully and then open the new project with the TI in it it usually works.

worth reporting i think so they know it needs to be worked on before the beta goes to release status.

let's just say i'm using 10.6. here and i didn't have it so far. more specifics would be helpful.

best, marc

[sawtooth]

let's just say i'm using 10.6. here and i didn't have it so far. more specifics would be helpful.

best, marc

I think it's something with the new quad core imacs... It gives me the 'audio driver failed' when I try to use virus control - I went through support, but it didn't help... I'm not sure what other specifics there are...