Log in

View Full Version : TIOS 4.5.2.07 Release is out

HUEY
12.10.2011, 07:12 AM
About TIOS 4.5.2 Release
Resolved issues, refinements and new features:
• VC: opening VST3 Plug-In window multiple times could crash OS X host software (fixed)
• VC: crash in Cubase on OS X when using both VST3 and VST2 Plug-In (fixed)
• VC: stability on OSX when using projects with lots of automation (improved)
• VC: only first and last value stored when recording automation in Pro Tools (fixed)
• VC: occasional crashes when changing the USB port on Mac (fixed)
• VC: Virus TI Snow Plug-In created uncompensated latency (fixed)
• VC: distorted audio on certain Mac models (fixed)
• VC: USB output settings were lost after switching off/on device (fixed)
• VC: Generation of support profiles out of Virus Control
• VC: (Mac) MIDI timing improved
• IN: Legacy manuals removed from installer.
• VCC: wrong status and version displayed when updating Virus TI
• SE: Crackling can occur with certain patches (fixed)
• SE: Arpeggiator Sync better with VC now
• SE: Rotary Speaker gets the signals correctly in Oscillator Split Mode
• SE: Random Generator works correctly now
• SE: Synced LFO's will run at correct timing, after you change the LFO Clock
• SE: Unison LFO Phase works correctly now
• SE: Mod Matrix assignments will not “drift in time” any more
Known issues:
• Side chaining into audio instruments is currently not supported in Steinberg Cubase.
• Ableton Live still changes MIDI timing of tracks recorded with Virus Control instantiated.
debian!
12.10.2011, 08:22 AM
Hi great news...

What mean
VC - ?
IN - instruction?
VCC - ?
SE - ?
pauldavid
12.10.2011, 03:51 PM
Gotta say that for me....and I do mean "For me" because I'm sure results will vary ......this has been the best version yet !

I am on a new iMac also used an older iMac and have always experienced the red sync error and constant dropouts , stuck notes that do not reset, jumbled mess of noise , crashes etc etc using cubase logic pro and ableton.

I have been playing back a heavy project while switching patches and so far have not received the sync message that is at the bottom of the virus plugin.
This would always be garunteed to happen in the other versions.

The arp seems to be tighter also.

It's been a long wait for this but at the moment I am happy with it.
grs
13.10.2011, 12:08 AM
I'm looking forward to seeing how all you guinea pigs get on.
feedingear
13.10.2011, 02:46 AM
I'm looking forward to seeing how all you guinea pigs get on.

I'll let you know, i held off getting the beta, but going to give it a whirl and get to play with the new features.
grs
13.10.2011, 07:15 AM
The last beta was a crash fest, I stayed with 4.5.0.16.
It's good to know I can fall back on this.
MrBump
13.10.2011, 12:56 PM
Sorry for being dim, but how would I get this?

cheers
HUEY
13.10.2011, 02:31 PM
Sorry for being dim, but how would I get this?

cheers

From the Access download page:
http://virus.info/page/render/lang/en/p/25/do/Downloads_user_manuals_and_additional_patches_for_the_virus_ti.html

But you must be registered to download it.
nutrinoland
13.10.2011, 03:18 PM
Its here.. :)

Gonna try soon...
HUEY
13.10.2011, 04:16 PM
I have a lot of problems
Walk through the patches from the "Impulse factory Hardstyle soundset"
Some patches sound distorted, some do not sound at all, from some sounds some keys do not give a signal or a very low or hard signal etc etc etc

I gave up after 2 minutes of testing

Windows XPsp3 32 bit
AndrewM
13.10.2011, 06:47 PM
Anyone running Cubase 6? Is the timing issue fixed???
Pschelfh
15.10.2011, 10:15 AM
Unison behaves strange in 4.5.2

Just try preset 'ROM A0 3-Dumm HS'. Press EDIT-button, go to Unison and dial in some additional Voices. On Twin, 4, 6, 7 and 8 the sound is much duller, like the filter cutoff is much lower!

Factory sounds that already are in Twin Unison seem to sound ok, but on my own programmed sounds, filter cutoff is much lower only in the left channel.

Peter.
AndrewM
15.10.2011, 05:54 PM
Anyone running Cubase 6? Is the timing issue fixed???

Everything seems fine in Cubase 6 though one of the patches I had in a track I was working on changed and I had to re-adjust it after the update. I was having problems with Cubase hanging on exit once and a while and I knew it was because of the Virus. I haven't had that problem since I updated.
Haplo
17.10.2011, 01:05 PM
Unison behaves strange in 4.5.2

Just try preset 'ROM A0 3-Dumm HS'. Press EDIT-button, go to Unison and dial in some additional Voices. On Twin, 4, 6, 7 and 8 the sound is much duller, like the filter cutoff is much lower!

Factory sounds that already are in Twin Unison seem to sound ok, but on my own programmed sounds, filter cutoff is much lower only in the left channel.

Peter.

Tested the patch on a Snow, it seems fine as long as it's not an even number of unison voices, e.g. Twin, 4, 6 sounds muted/dull but 3, 5, etc. is fine.
At least on my setup :)
Haplo
17.10.2011, 01:40 PM
I have a lot of problems
Walk through the patches from the "Impulse factory Hardstyle soundset"
Some patches sound distorted, some do not sound at all, from some sounds some keys do not give a signal or a very low or hard signal etc etc etc

I gave up after 2 minutes of testing

Windows XPsp3 32 bit

Tested some of the patches in that soundset and yes some didn't sound at all, seem to be related to the unison issue reported on page2.
Changing unison from Twin to e.g. off or 3 and they seem to work again.
HUEY
17.10.2011, 03:28 PM
New version is out that solves the unison problem:

About TIOS 4.5.3 Release
Resolved issues, refinements and new features:
• VC: Imageline FL Studio latency issue (fixed)
• SE: Voice allocation problem with certain unison configurations (fixed)