The Unofficial Access Virus & Virus TI Forum - since 2002

The Unofficial Access Virus & Virus TI Forum - since 2002 (http://www.infekted.org/virus/forum.php)
-   General discussion about music production (http://www.infekted.org/virus/forumdisplay.php?f=106)
-   -   getting a track ready for mastering - my first time... (http://www.infekted.org/virus/showthread.php?t=27468)

pseudonym 18.09.2006 10:26 AM

getting a track ready for mastering - my first time...
 
Hey,

What's the best practice for getting your track ready for mastering in terms of the levels of sound etc...

I've been using vintage warmer, UAD plugs and an outboard exciter on my track to make it sound as big as possible, but will that spoil the job the professional mastering dudes will do?

is it best to just deliver a clean sounding mix without beefing up the bottom end and making the high end polished with excitement?

or is anything I do to make the sound richer and warmer just going to add to the quality of master?

I'm getting myself hyped about having a track that's good enough to be mastered (after about 8 years of practice - damn I'm slow...)

so, in my heightened state of hype, I'd love to hear from anyone who's been though this process and can tell me what it's like to send and receive from a pro mastering studio...

cheers,

pseudo

Tomer=Trance 18.09.2006 04:27 PM

Personaly this is how i finish a mix:
peaks: avarage peaks are between -6 to -4 db you dont have to get it any louder and then be forced to use a limited on the 2Bus to get thos nasty digital distorted +0db peaks under control.
The mastering engineer has better tools and methods to geting it loud and squashed. :mrgreen:

stereo enhancment- avoid it,he will take care of that side aswell.

2Bus compression: that i usualy like to do just to "glue the mix" usualy 1.5\2:1 ratio with 2-4 db of GR.

EQ on 2Bus: if you really feel like you need it ,use it but use it gently because it will be hard to correct in the mastering stage if your Eqing is not what the mastering engineer has in mind.

ah and the format of course ,44.1khz 24bit Wav :wink:

good luck :D

pseudonym 18.09.2006 08:18 PM

wicked, thanks tomer :)


how much sexier does one of your records sound when it comes back from mastering?

jasedee 18.09.2006 10:06 PM

You need to speak to the mastering engineer to find out what the ME expects. If you're tracks are at 24bit, leave them at 24bit, but yeah, just find out from the ME what is best for him/her.

As for additional processing, why not bring in both versions? There's no harm in bringing in multiple mixes and going through them with the ME.

Alot of the time, if your tracks are well mixed, the difference between the non-mastered and mastered versions are very slight. Overall loudness, and some fine tuning to make the mixes translate onto other systems.

I've only been through the process twice, both with mid-level ME's, and I think next time I'll really go to town and book in with one of the top guys. It really is a great experience hearing your track being played through a pair of $20k monitors in a $100k treated room.

Be sure to speak up if you're hearing something you dont like.

Have fun mate!

pseudonym 19.09.2006 11:49 AM

Hey,

I got in touch with LOUD recordings, and they recommend delivering three mixes. One without treatment, one with half treatment, and one as big as I can get it. LOUD are regarded as one of the best in the UK, but I'll not be able to actually go down to their studio :(

Actually, maybe I'm lying... My mum lives in the same town as their studio.

"No, really mum, I'm coming to visit you because I want to spend some quality time with you... honest..."

Gopal 20.09.2006 12:51 AM

My advice, Leave at least 5db of headroom

Don't do any dithering

Don't use any exciters

Use as little comression as you can get away with


The first two are absolutely essential

pseudonym 20.09.2006 06:30 PM

ta Gopal..

Your drumstation 2, do you recommend it? I'm looking for one and can't find one :(

Gopal 20.09.2006 11:59 PM

Pseudonym, I love my Drumstation 2, it is probably one of my best purchases so far. If you listen to the track "Drunken Strut" in my soundclick link you'll hear it in action. It is completely unprocessed in that track. No compression, no reverb, just subtle eq on the mixing desk. If you want to write techno or electro or something similar and you want authentic 808 and 909 sounds it simply cannot be beaten. Would cost 5-6 times as much for the real things that sound EXACTLY the same. I just wish it had a 909 style step sequencer.

pseudonym 21.09.2006 11:02 AM

right then...

where's my Drumstation 2!?


So, what's the difference between a Drumstation, and the D-Station?


-- damn cool track btw :p



I can't believe that's with no compression etc... It just sounds right - cuts through your mix, has plenty of bounce and bottom... grrr -

I've spent days trying to make my kicks sound right with EQ and compression etc, and even the Virus has some ace kicks, but I just can't get it sounding right like that immediately does...

woe is me

pseudonym 22.09.2006 01:08 PM

hey,

got myself a drumstation coming tomorrow...


bit of flash cash and a friend who didn't want theirs anymore - yee ha!


All times are GMT. The time now is 02:48 AM.

Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2002-2022, Infekted.org