Routing on Ti Polar, KP3 and Live
 

Hey guys!

I have a question, which I can't seem to find an answer to.


In my setup, I use my Ti as an Audio interface (Monitors connected to analog out 1/2). Furthermore I have a Kaoss Pad 3. So, is it possible to route the master (or any given track) in Ableton through analog out 2/3 and through the KP3 into the anolog in on the Ti, sorta like a send/return effect, if you get the idea...?


Thanks in advance!

Fuhr :)

Hmm... Seems I'm just a n00b.. But I still don't get it? Is the Virus Ti capable of doing this at all? Or am I misunderstanding the function of outputs 3-6?

If I am, could someone point me in the right direction for setting things up?

I'm still bugged with this issue. Could someone point me in the right direction for installing my setup (optionally, what to buy to make it work)? :)

Depending on what you are trying to achieve, pop the KP3 either before the input stage... or between your output and monitor stage.

Other than that, I don't understand the question lol. I've used a KP3 + Synth for live purposes before. The synth output went into the Kp3 and then to the monitors. So live modulation :D
________
genetically modified food

The Virus TI is a STEREO ONLY audio interface. You cannot route any audio out of outputs 3-6. They are for Virus Synth assignment output assignment only. You need another audio interface for that to work, or else all you get is a nasty feedback loop from looping input to output.

Virus TI Audio Interface = 1/2 In and 1/2 Out
Virus Synth= 1/2, 3/4, 5/6

Does that mean if I am using the TI as my sound card, I cannot route audio from Virus Control out analogue 1/2 and the audio from Stylus RMX (within Live) out analogue 3/4 ?

I would then run analogue 1/2 and 3/4 through an analogue mixer if the above is possible.

Correct, but I think you could route RMX/Live output through 1/2 and the Virus out 3/4 direct. (Not 100% confirmed, I have Snow with only 1/2 outs.)

To combine this with the OP's question, you could take the 1/2 and 3/4 outputs into a mixer, with the KP-3 on an aux bus. That way, you could choose either the RMX/Live output or the Virus output to run through the KP-3.

Also to the OP: To do what you originally asked, you'll need a separate audio interface rather than the Virus, one with multiple stereo pair I/O.

Alright, thanks guys :)

Seems like I'll have to invest in a new Audio Interface (since i don't really fancy having an analog mixer. Trying to keep it all in Live).


Can you recommend any in a fairly reasonable pricerange? (Since I'm a student)

Well.... You can route the Virus directly out of Analog 3 + 4 with no DAW processing, and then play stylus out of Analog 1 +2.

Try this one... I like the one on the bottom.

http://www.whammies.net/Pics/WomanAs...WomanKnobs.JPG