[dj da hood]

I found multi mode very confusing hearing too many sounds and not knowing
how to switch of the channels here is my method

1. press the multi mode switch on the righthand side of the lcd display
2. press the edit + shift mode at the same time to get edit multi
3. you should see part enabled on. this should be off on all channels
you should see the midi channel 1-16 in the top right hand corner
by using value 1 knob turning left or right to switch off all channels
use part pads to scroll through midi channels 1-16
4 go back to channel 1 and switch part enable to on and select a bank
rom-j or any bank you like then choose a program number when you
press the keyboard you should hear one sound bank remember to save
by pressing store button and renaming this bank.
5 press the part button to move to channel 2 it will be displayed
in the top righthand corner again. part enabled to on and select
a contrasting sound on a bank and program number.save this by pressing
store button on the lefthand side of the lcd display.
6 you should have two layered sounds on your keyboard