View Single Post
  #1  
Old 12.09.2009, 03:53 PM
aymat aymat is offline
New here
New here
 
Join Date: 29.06.2009
Posts: 4
Default VirusTI MK1 input/output issue

Hi, not sure if anyone here has noticed this yet on their own units, but Im having a difficult time getting audio from the right analog input/output of my VirusTI after the last two OS updates (3.1 and 3.2).

I use my VirusTI in analog mode at the moment, routing signal from my mixer's aux send to the VirusTI and back, making the VirusTI a dedicated fx unit for the rest of my studio set up.

Ive verified that the aux sends are working properly on my mixer and that the stereo cables Im using are working properly.

The input mode on the virus is set to static and I have switched outputs as well in the config panel to all three analog outputs on the VirusTI, still experiencing the same issue. At this point Im not exactly sure if its an issue with the right analog input or the right analog outputs, although Im assuming its the input.

The only option I have at the moment is to set to the input mode to left and this allows me to hear the signal from the left channel on both speakers. I still would like to process the complete stereo signal as Ive been doing for some time now, but Im at my wits end trying to figure this one out. Can anyone help?
Reply With Quote