Hi, it is very much possible, but only with a slight setup involved. I don't have VC open at the moment, but the far right there should be a settings tab/config tab etc. In there you will see a drop down menu to change the number of outputs. It will default to 2, you can change it to 3 outputs/0 inputs.
From there, select the patch you want to change its output, and on the COMMON tab to the right you will see a drop down menu where you can select which USB output you want that particular patch to play through. Change it to 1, 2, or 3. Yes the Snow is a 4 part, but there is only 3 physical outputs. Not 4, but still better than your current 2.
|