sound levels - The Unofficial Access Virus & Virus TI Forum

Montyc · #1 08.01.2005, 10:44 AM

all my sounds that come from the virus c come out on cubase at about 1/2 the sound of all the other vst instruments.am using a tascam us 122 as midi controller.

grs · #2 08.01.2005, 10:48 AM

Mainly because the virus c is not a VST instrument.

Montyc · #3 08.01.2005, 11:17 AM

i know its not a vst instrument but surely there is a way of making it louder in the mix...?

tranzash · #4 08.01.2005, 03:14 PM

In multimode, you could adjust the part volume for each midi channel in VC.

jasedee · #5 08.01.2005, 07:49 PM

Perhaps your soundcard inputs are +4.....is there a way you can change them to -10???

Wandering Kid · #6 10.01.2005, 06:53 AM

+4 should be way louder than -10. a couple of things i noted. even with the master volume maxed on my virus b, part volume maxed it played through fruity loops mixer relatively quiet. i had to boost the volume on the mixer quite alot and in some cases had to add a parametric EQ to whack up the volume even more.

ive been doing this since i got the virus thinking it was normal :\ although some peeps here seem to suggest its not? ill screw around later on after i finished uni since im back in soton with all my gear again.

incidentally, i know you dont need a preamp between the virus and your audio interface but would this help? running my guitar through the virus input produces a very quiet, blurry sound. i have to boost the signal over 20 dB to get it up to a level where its audible and even then on floop's mixer it isnt clipping according to the dB meters - not by a long shot. the sound is very blurry too. i dont remember having problems like this when i ran my guitar (preamped) through to a 4 track recorder.

jasedee · #7 10.01.2005, 10:06 AM

Quote:

Originally Posted by Wandering Kid

+4 should be way louder than -10

BZZZZ!!!!! Wrong....

+4dBu and -10dBV.....notice how each has a different letter after it? And 0dBu does not equal 0dBV

If your soundcard inputs are at +4dBu, and you send it an unbalanced, -10dBV signal (ie from a synth) you will get a lower input level.

Try it...

Wandering Kid · #8 10.01.2005, 03:01 PM

alls i know is i push the +4 button on my 1010 and it makes my virus slightly louder but it distorts. since im all unbalanced i do as the manual says and run it -10.