Access Virus & Virus TI community since 2002 Virus TI Infekted

Go Back   The Unofficial Access Virus & Virus TI Forum - since 2002 > Discussion concerning Access products > General discussion about Access Virus

General discussion about Access Virus Discussion about Virus A, B, C and TI.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 09.04.2005, 12:23 PM
Sleepwalker's Avatar
Sleepwalker Sleepwalker is offline
Amateur
Amateur
 
Join Date: 23.09.2004
Location: Oslo, Norway
Posts: 152
Default Multies & multi parameter controll

Hello!

So the TI is finaly around the bend? Jiiha!

Well, actualy I have a question about the virus b, witch im using at the moment. (borowing from a friend) When modulating say the cutof on a multi, I cant seem to find out how to affect all the single parts in the multies at the same time, withouth manualy selecting each of them. Is this not possible, and will it be possible on the TI?

Didnt find anything in the manual about it...


Also Ive seriously been trying all posibilities of the virus b, all the wave forms and all the lfo3 options in the menu. Actualy I must say I thought you could do more whith this machine. Iwe so far programed about 60 presets on it, mostly wicked, twisted arpeggio sounds. Last summer I tested the Indigo2 a couple of hours in a shop, and I could swear I got wider results, am I right? Im also considering the TI, but if it is just a virus b on steroids, I see no reason at all to spend all that monny, and rather get a used virus c. I mean i love the total integration, but I dont think the virusB is broad enough sounding, is the TI more versatile?!! Think Id rather get a new pc (as there is lots of good sounding soft synths theece days), and a used virus c..... or do I? Of cource the TI is temting.... but I also need a new laptop, as im working on a 867mhz G4!!! I dont think I can aford bouth.. My friend that boroved me the virusB, does not use it much any more. He use the Vanguard, the Quadra Sid (beter filters then the virus, i swear, and just as good as my elektron monomachine!!!) Imposcar (also great filters) Reaktor stuf, Arturia stuf, AAS stuf, and lots of others, on a pentium M 2ghz, and hes newer abow 50%cpu usage, using 14 imposcars + effects, and other synths!!. Reason he says not using the virus B is that the soft synths sound just as good, or better in total (much broader of cource), and its eazier to have every preset saved in the project. Also using external controllers theece days, is no problem!

Id like to know what people here feel about this, if you dont mind chearing some words? And from they who realy know theyr virus deeply, why will the TI blow my mind?


Best,
Kim

Oh, im doing psychedelic trance by the way if you wondered, thats why good modulating futures are important to me.
Reply With Quote
  #2  
Old 11.04.2005, 11:51 AM
Sleepwalker's Avatar
Sleepwalker Sleepwalker is offline
Amateur
Amateur
 
Join Date: 23.09.2004
Location: Oslo, Norway
Posts: 152
Default Re: Multies & multi parameter controll

Quote:
Originally Posted by Sleepwalker
Hello!

So the TI is finaly around the bend? Jiiha!

Well, actualy I have a question about the virus b, witch im using at the moment. (borowing from a friend) When modulating say the cutof on a multi, I cant seem to find out how to affect all the single parts in the multies at the same time, withouth manualy selecting each of them. Is this not possible, and will it be possible on the TI?

Didnt find anything in the manual about it...


Also Ive seriously been trying all posibilities of the virus b, all the wave forms and all the lfo3 options in the menu. Actualy I must say I thought you could do more whith this machine. Iwe so far programed about 60 presets on it, mostly wicked, twisted arpeggio sounds. Last summer I tested the Indigo2 a couple of hours in a shop, and I could swear I got wider results, am I right? Im also considering the TI, but if it is just a virus b on steroids, I see no reason at all to spend all that monny, and rather get a used virus c. I mean i love the total integration, but I dont think the virusB is broad enough sounding, is the TI more versatile?!! Think Id rather get a new pc (as there is lots of good sounding soft synths theece days), and a used virus c..... or do I? Of cource the TI is temting.... but I also need a new laptop, as im working on a 867mhz G4!!! I dont think I can aford bouth.. My friend that boroved me the virusB, does not use it much any more. He use the Vanguard, the Quadra Sid (beter filters then the virus, i swear, and just as good as my elektron monomachine!!!) Imposcar (also great filters) Reaktor stuf, Arturia stuf, AAS stuf, and lots of others, on a pentium M 2ghz, and hes newer abow 50%cpu usage, using 14 imposcars + effects, and other synths!!. Reason he says not using the virus B is that the soft synths sound just as good, or better in total (much broader of cource), and its eazier to have every preset saved in the project. Also using external controllers theece days, is no problem!

Id like to know what people here feel about this, if you dont mind chearing some words? And from they who realy know theyr virus deeply, why will the TI blow my mind?


Best,
Kim

Oh, im doing psychedelic trance by the way if you wondered, thats why good modulating futures are important to me.
Bump!
Reply With Quote
  #3  
Old 11.04.2005, 12:11 PM
ben crosland ben crosland is offline
Veteran
Veteran
 
Join Date: 26.08.2003
Posts: 599
Default Re: Multies & multi parameter controll

Quote:
Originally Posted by Sleepwalker
When modulating say the cutof on a multi, I cant seem to find out how to affect all the single parts in the multies at the same time, withouth manualy selecting each of them.
You need to to do two things:

a) Set all multu partsparts you wish to affect with the same modwheel sweep to the same midi channel that you send the modwheel from.

b) Make sure all of the patches you hope to control are set to respond to Modwheel in the first place (i.e. in the modmatrix).
Reply With Quote
  #4  
Old 13.04.2005, 07:27 AM
Sleepwalker's Avatar
Sleepwalker Sleepwalker is offline
Amateur
Amateur
 
Join Date: 23.09.2004
Location: Oslo, Norway
Posts: 152
Default Re: Multies & multi parameter controll

Quote:
Originally Posted by ben crosland
Quote:
Originally Posted by Sleepwalker
When modulating say the cutof on a multi, I cant seem to find out how to affect all the single parts in the multies at the same time, withouth manualy selecting each of them.
You need to to do two things:

a) Set all multu partsparts you wish to affect with the same modwheel sweep to the same midi channel that you send the modwheel from.

b) Make sure all of the patches you hope to control are set to respond to Modwheel in the first place (i.e. in the modmatrix).
Thanks Ben

Well, its a Virus A, not B as I previously thought when I wrote this question, and it does not have a modmatrix.. And it is a desktop version, so it does not have a modweel or a modweel setup config in the menu..

Best,
Kim
Reply With Quote
  #5  
Old 13.04.2005, 07:36 AM
ben crosland ben crosland is offline
Veteran
Veteran
 
Join Date: 26.08.2003
Posts: 599
Default Re: Multies & multi parameter controll

Quote:
Originally Posted by Sleepwalker
Well, its a Virus A, not B as I previously thought when I wrote this question, and it does not have a modmatrix.. .
Sure it does - look a little deeper in the Single Edit menu.

Assign1 Source = set to Modwheel

Destination = Whatever you like.
Reply With Quote
  #6  
Old 13.04.2005, 07:52 AM
blay's Avatar
blay blay is offline
This forum member lives here
This forum member lives here
 
Join Date: 08.11.2004
Location: Melb, AUS
Posts: 1,097
Default Re: Multies & multi parameter controll

Quote:
Originally Posted by Sleepwalker
Hello!

So the TI is finaly around the bend? Jiiha!
is it?
well I hope you are right...

cheers

blay
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Parameter control anstill79 Trouble with your Access Virus? 0 06.06.2007 07:05 AM
parameter jump Guzzy General discussion about Access Virus 4 17.02.2006 10:25 PM
Cubase SX1 Parameter Problems techno_7 General discussion about music production 2 13.05.2005 02:05 PM
multi single multi normal multi rubbish! myfriendvirus Trouble with your Access Virus? 14 26.03.2005 08:59 PM
where is the dest parameter in MicroQ Lfo? TrAnCeR Studio equipment 0 14.10.2003 05:08 PM


All times are GMT. The time now is 09:30 PM.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Skin Designed by: Talk vBulletin
Copyright ©2002-2022, Infekted.org