Access Virus & Virus TI community since 2002 Virus TI Infekted
Main    Forums   Register    Member List    Infekted Calendar    FAQ    Today's Posts    Search   

Go Back   The Unofficial Access Virus & Virus TI Forum - since 2002 > Discussion concerning Access products > General discussion about Access Virus
Reload this Page Rubber feet for deskop Virus?

General discussion about Access Virus Discussion about Virus A, B, C and TI.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 25.03.2008, 04:31 PM
boreg boreg is offline
Infekted!
Almost Amateur
  
Join Date: 04.12.2007
Posts: 116
Default Rubber feet for deskop Virus?
Hi all!

As mentioned in another thread, I play keyboards in a band - this Saturday we had our first gig with me on the Virus. When unpacking at home, I noticed that two of the rubber legs are missing; they probably fell off during the rehearsals and I didn't notice for a while. It's not a big deal, I'll make something myself, but it sure won't look sexy )). So, being the perfectionist that I am, I'd like to know if the original ones can be obtained somehow? Or maybe somebody has a better idea?

best wishes,
Boris.
Reply With Quote
  #2  
Old 25.03.2008, 11:31 PM
jasedee's Avatar
jasedee jasedee is offline
This forum member lives here
This forum member lives here
  
Join Date: 11.12.2003
Location: Northern Beaches - Sydney, Australia
Posts: 2,755
Default
Your best bet would be to contact Access and see if they'll ship you out some spares. You could also probably find some generic rubber feet, not sure where you'd start though.
__________________
MYSPACE

G5, Cubase SX, Reason 2.5, Acess Virus RackXL, Yamaha Motif Rack, Yamaha CS-10, Roland D-50, Korg X5D, Korg Electribe ER-1mkII, HALion VST Sampler, MOTU 2408mkIII, Studer 169, Roland JUNO 60
Reply With Quote
  #3  
Old 26.03.2008, 12:04 AM
AlexHall74's Avatar
AlexHall74 AlexHall74 is offline
Administrator
This forum member lives here
  
Join Date: 18.10.2004
Location: Florida
Posts: 1,485
Default
If you are anywhere near the perfectionist that I am, contact Access immediately. You'll have a freaking coronary if your rubber feet aren't factory OEM issue...

__________________
- .... . | -.-. .... --- ... . -. | --- -. .
_____________________
Music is the answer...
ESTP/7w8/Type-A Hostile
Reply With Quote
  #4  
Old 26.03.2008, 08:44 AM
Shambler Shambler is offline
Am starting to like this forum
Newbie
  
Join Date: 21.01.2008
Location: UK
Posts: 78
Default
When I unwrapped my new VirusTI I found one of the feet on top of the unit so I can understand they come off quite easily

In fact my Virus only has 3 feet, two at the front and one in the middle at the back, is it meant to have 4?
Reply With Quote
  #5  
Old 26.03.2008, 08:43 PM
Onkel Dunkel's Avatar
Onkel Dunkel Onkel Dunkel is offline
Aged Veteran
Aged Veteran
  
Join Date: 12.08.2004
Location: Copenhagen, Denmark
Posts: 908
Default
When i bought my Virus C desktop (brand new), one of the rubber feet was missing so they proberbly don´t stick well. The ones on my laptop keep falling off as well...
__________________
If you go to bed with a scratchy ass, you will wake up with smelly fingers...

http://www.myspace.com/onkeldunkeldk
Reply With Quote
  #6  
Old 26.03.2008, 10:50 PM
plaid_emu plaid_emu is offline
Infekted!
Almost Amateur
  
Join Date: 03.02.2008
Posts: 111
Default
Most hardware stores carry a variety of rubber feet. I found ones that were much nicer than the stock MPC-1000 feet.
Reply With Quote
  #7  
Old 11.10.2016, 03:05 PM
charonme charonme is offline
Definately caught something...
Very mucho Newbie
  
Join Date: 11.10.2016
Posts: 36
Default
I don't understand why manufacturers use self-adhesive rubber feet - they fall off so easily! Almost every piece of gear I've seen is missing some of them. I ordered a couple off ebay (there are hundreds of different kinds for 1-2 euros for a set and free shipping from china if you're willing to wait a month) and I'm going to bolt them to the virus once they arrive.
Reply With Quote
  #8  
Old 11.10.2016, 03:37 PM
theMusicMan's Avatar
theMusicMan theMusicMan is offline
Analog synth DSP lover
Amateur
  
Join Date: 28.10.2006
Location: Wales
Posts: 170
Default
Give us a link when you find some as mine have also come off my TI Desktop!! Cheers matey
__________________
John
theMouthPiece | RADIAS Demos | Cubase Studio 4 | Dell P4 2G RAM | Virus TI | Korg RADIAS | Korg KARMA | Absynth | Reason | KLC | Electribe EMX1 | Boss DR880
Reply With Quote
  #9  
Old 12.10.2016, 06:40 AM
charonme charonme is offline
Definately caught something...
Very mucho Newbie
  
Join Date: 11.10.2016
Posts: 36
Default
I'm going to use these www.ebay.ie/itm/282129211486
but I have to cut a bit from them because the screws are too close to the edge

or you can use these if you don't want to bolt them down www.ebay.ie/itm/180739993765

or just search worldwide ebay for "rubber feet"
Reply With Quote
Reply

« Previous Thread | Next Thread »

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Hybrid Mode Hybrid Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:44 AM.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Skin Designed by: Talk vBulletin
Copyright ©2002-2022, Infekted.org

Contact Us - Home - Archive - Top