Problem with the LEDs. (Unsolved)

[Hollowcell]

After turning on my VC today I noticed something a little wierd. The LEDs in the filter section of my VC are acting really odd!

1. The filter 2 HP LED seems to be lighting up at 50% and flashing to the BPM tempo when not selected. Also the other LEDs in the filter 2 section stay lit up at around 30% to 40% all the time - no matter what filter is selected.

2. If I select filter 2 only, the filter 1 LED stays lit up at around 60%. But if I select filter 1 only, filter 2's LED turns off completely.

3. Now here's where it gets wierd! When I push the effects edit button, the LP LED in the filter 2 section lights up - flashing to the same tempo that the edit light flashes. 8O

This is happening with all the patches and in Multi mode, Single mode and Multi-single mode.

As far as everything else goes, the machine is working fine. No glitches with the sounds or when programming.

Has anyone else had a/or is having a simialr problem?