Access Virus & Virus TI community since 2002 Virus TI Infekted

Go Back   The Unofficial Access Virus & Virus TI Forum - since 2002 > Discussion concerning Access products > General discussion about Access Virus

General discussion about Access Virus Discussion about Virus A, B, C and TI.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 19.07.2006, 06:43 PM
mind_over_gravity's Avatar
mind_over_gravity mind_over_gravity is offline
Analog Synth Dsp Lover
Analog Synth Dsp Lover
 
Join Date: 29.10.2005
Posts: 49
Default MY VIRUS IS OFF-KEY

in the last week i get a very strange phenomenon its never happened to me before
my virus went crazy ,almost every fifth patch is off-key ,i don't know what to do i tried
everything
my setting: my virus connect via usb only to route it with my m-audio midi keyboard on the cubase 3.1 ,also sync clock from the cubase using usb .
im not using VC control at all .
thanks.
__________________
cubase 3.1,HPD15,DR880, variOs+D50 V-card,Fantom X6+SRX WC,Micron,Virus Ti,Radium 61,Midisport 4X4,Delta44,Audiophile 192,XPP SP2 P4 1.8/1Gb 2X40HD Matrox G550,XPP SP2 P4 2.8/1.5Gb 2X80HD+Extenal HD 180GB+250 GB,Gforce 128mb,Tapco 8inch Monitors
Reply With Quote
  #2  
Old 20.07.2006, 04:49 AM
grs's Avatar
grs grs is offline
Veteran
Veteran
 
Join Date: 15.11.2004
Location: Au
Posts: 558
Default

Are you working with VC or with spdif from the TI? If so try switching sample rate in your computer/sequencer to 44.1khz then back to what ever you were at, ie 88.2K or 96K etc.
Reply With Quote
  #3  
Old 20.07.2006, 11:21 AM
mind_over_gravity's Avatar
mind_over_gravity mind_over_gravity is offline
Analog Synth Dsp Lover
Analog Synth Dsp Lover
 
Join Date: 29.10.2005
Posts: 49
Default

im not working with vc at all
i tried to dissconnect USB and listen to some of the patches using only analog out and audition buttons(shift+search)
and the sound was also off-key .
__________________
cubase 3.1,HPD15,DR880, variOs+D50 V-card,Fantom X6+SRX WC,Micron,Virus Ti,Radium 61,Midisport 4X4,Delta44,Audiophile 192,XPP SP2 P4 1.8/1Gb 2X40HD Matrox G550,XPP SP2 P4 2.8/1.5Gb 2X80HD+Extenal HD 180GB+250 GB,Gforce 128mb,Tapco 8inch Monitors
Reply With Quote
  #4  
Old 20.07.2006, 02:25 PM
grs's Avatar
grs grs is offline
Veteran
Veteran
 
Join Date: 15.11.2004
Location: Au
Posts: 558
Default

All I know is that if my project was saved in 88.2Khz and I open it, it's then out of tune. I have to switch sample rates in the host about 4 times!!!!

The engine is playing a multiple of 48Khz but being forced out of tune by the usb syncing to the computers 44.1Khz(x2).

[mind_over_gravity] If you have the USB plugged into you comp that might be doing it without you actually opening VC. [/]

ACCESS STOP MAKING FLAKY CODE.....

GET THE SAMPLE RATE / PITCH RIGHT.....

WRITE YOURSELF A BETTER BETA TEST CHECKLIST....
Reply With Quote
  #5  
Old 20.07.2006, 07:45 PM
mind_over_gravity's Avatar
mind_over_gravity mind_over_gravity is offline
Analog Synth Dsp Lover
Analog Synth Dsp Lover
 
Join Date: 29.10.2005
Posts: 49
Default

thanks grs
but that what access support told me to do and it didn't help
they thought it might be a sample rate conflict
but after trying to switch the sample rate form 44Mhz to 48Mhz and back
the sound was off-key as before
__________________
cubase 3.1,HPD15,DR880, variOs+D50 V-card,Fantom X6+SRX WC,Micron,Virus Ti,Radium 61,Midisport 4X4,Delta44,Audiophile 192,XPP SP2 P4 1.8/1Gb 2X40HD Matrox G550,XPP SP2 P4 2.8/1.5Gb 2X80HD+Extenal HD 180GB+250 GB,Gforce 128mb,Tapco 8inch Monitors
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:11 AM.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Skin Designed by: Talk vBulletin
Copyright ©2002-2022, Infekted.org