To get the Atomizer to work, (on the TI ) press edit, and then parameters button to locate the inputs page. Select Atomizer=On Value 16.(‘Normal’ mode is ‘On’)
On the snow-Hold EDIT/SHIFT and press COMMON to enter EDIT SINGLE, locate the Inputs page, and select Atomizer=On .. 16 (‘Normal’ mode is ‘On’)
You have to pass an audio signal through the unit and back into your sequencer/DAW to make this function work.
I just connected 2 outs from my sound card (rme multiface) into 2 ins in my Virus. Then 2 outs from Virus back into 2 ins in my multiface.
Then, in sequencer/DAW, play the audio track, having it routed to Ext Out, selecting channel (same number as outs from sound card).
Then on new Audio track in DAW, select, Audio from channel- (same number as ins in sound card).
Also, make sure you have changed your "main outs" in the 'common' section in your Virus control panel from usb setting to 'Out1 L+R'.
You should be able to get this to work fine.
|