The new tutorial Reece Bass Lead with Patch!!!

[inforlk]

Hello this is the tutorial to get the famous sounds of Drum & bass producers like Noisia, Spor, Teebe etc.

1 - Add the patch "ringsyn" a Virus TI into 3 parts multitimbral.

2 - In channel multitimbral the outputs AUX as shown in photo.

3 - In your DAW draw the same notes for 3 parts multitimbral.

4 - Assigned in your DAW multitimbral parts & Channel Auxiliary reference:

Aux 1 - So good bass using LP filter at 200 Hz and static (no modulate) recommended (USB1 L+R).

Aux 2 - This part is the most important because it is where the modulation & effect ( Phaser & distorsion "d16 devastor") (USB2 L+R).
You must use a 12 db Bandpass filter with LFO Trig 1/4T or other, with Audio Triger detect enabled highly recommended that you use "Sugarbytes WOW".
Modulate the Frequency & LFO_rate "WOW" and automatize your DAW
and using other pluging the HP filter at 200 Hz static.
Look at the picture settings....

Aux 3 - This part combines the treble copy settings (automatize too) WOW Aux2 = Aux 3 but the frequency up to 3.000 KHz & another plug filter LP modulate & effect (distorsion o saturation) (USB3 L+R).

5 - ll this goes to a group channel AUX 1 + AUX 2 + AUX 3 = Channel Group. Plug HP modulate, you can also get a compressor.

Here I leave the examples of the auxiliary tracks divided:

http://two.xthost.info/inforlk55/Aux...%20Out%201.mp3
http://two.xthost.info/inforlk55/Aux...%20Out%202.mp3
http://two.xthost.info/inforlk55/Aux...%20Out%203.mp3
http://two.xthost.info/inforlk55/Fin...ead%20Bass.mp3
http://two.xthost.info/inforlk55/Fin...ith%20Drum.mp3

I love my Virus Snow.

I hope to resolve ..

Sorry for my English.

inforlk AKA Vocal Oscillator : http://soundcloud.com/groups/drum-bass-vocal-oscillator