Some keys not working

[pauldirks]

Hi Everyone,

I've got a problem that developed a couple days ago. Some keys are neither working with local on nor transmitting midi. But there is a distinct pattern of 2 subsequent semitones every so many tones. So for instance the following keys are not working (F#1, G1, D2, D#2, A#2, B2, F#3, G3, D4, D#4, A#4, B4 etc...)

Any ideas? (I've rebooted, haven't relaoded the software though)

Paul

[secretdj]

hey there did you ever figure this out? none of the keys are working on my new ti

[Doc Jones]

secret dj, did the keys ever work? if so and they just recently stopped working, then I would recommend a system reset.

[secretdj]

no they have never worked. I just got my Ti KB today and they have no worked....te synth works fine as a moduel but they keys do not work>? do you know how to do a reset on the Ti?? thanks

[Doc Jones]

when you say the keys work fine as a module do you mean that when you press a key it is able to send midi data (to control external sound modules)? If that is the case, then I would suspect that you have a setting check along the lines of "Local Off" where when you press a key, it sends midi data, but doesn't directly trigger an on board sound. If this isn't the case, to do a system reset - 1)soft power down the synth 2)unplug the synth 3)hold down the arp edit key 4)plug the synth back in 5)after plugging back in the synth, wait a few seconds and then release the arp edit key.

[secretdj]

thanks doc but no luck.what i meant was the physical 'keys' of my Ti KB do nothing.they cannot control anything....they are sending no info (note or midi..nothing...) the only way the synth itself worked as a sound module was....i used another synth i have to play the Ti sounds by selectingthe Ti as my output in Cubase...i did also try the reset but still ,no luck.

[Doc Jones]

ok, definitely not good. I would contact your distributor (where you bought it) and see if they can do an exchange for you - sounds like a hardware issue going on there. Good luck!