Juho L's synthprogramming tutorial

[Tomer=Trance]

clasic analog bass
set to monomode with legato and some minor portamento.
set punch to around 60
two saw oscilators
the master oscilator os set to 0 semitune
oscilator 2 set to -12 with just a bit of detune.
oscilator balance should be around 70-30.
for extra dirt add some noise oscilator but be aware that this might get in your way when mixing(usualy you dont need stuff that are in one spectrum area going to a second spectrum area aswell=bass is a low freq sound and should be kept there)

going to filter section
use two lowpass 4 pole filters with rarly closed filters
0 resonance
cutoffs are linked
cutoff 1 to around 20+-
same with cutoff 2
around 80-90 evenlope amount with A-0 D-40 S-5 R-127 settings
this is your basic.
to get some more lower end action use the analog boost,set to around 20-30 and add as much as you desire.

tomer always says:watch out of cliping and unwanted distortion.