What am I missing here - The Unofficial Access Virus & Virus TI Forum

johnwally · #1 15.04.2009, 01:29 AM

I am having the same problem , I ca control the synth via my DAW but I am unable to conect through sounddiver , the manual isn`t really much help ,

Ronkaz · #2 15.04.2009, 07:53 AM

Quote:

Originally Posted by johnwally

I am having the same problem , I ca control the synth via my DAW but I am unable to conect through sounddiver , the manual isn`t really much help ,

sounddiver is not for virus ti

r

MarkM13 · #3 15.04.2009, 10:57 AM

Assuming the USB cable is not connected. Check the lower right
hand corner of the display as you play a note on your controller.
If it's displaying a 1/2 note the unit is receiving MIDI but on the wrong channel.
Default is channel one. Make sure your novation is sending one only channel one.

Also, check your config settings and make sure the "Virtual MIDI through" isn't selected.

HTH

M

ehunter · #4 16.04.2009, 12:43 PM

Quote:

Originally Posted by MarkM13

Assuming the USB cable is not connected. Check the lower right
hand corner of the display as you play a note on your controller.
If it's displaying a 1/2 note the unit is receiving MIDI but on the wrong channel.
Default is channel one. Make sure your novation is sending one only channel one.

Also, check your config settings and make sure the "Virtual MIDI through" isn't selected.

HTH

M

I have the usb cable disconnected and i dont see the display on the snow you are talking about. I am thinking it must be something setup on the novation. Aside from setting to channel 1 is there anything else I should look for?

lotus-eater · #5 16.04.2009, 12:59 PM

You should also check to see that the novation is sending midi (on the correct channel) to the Midi output you've selected. I believe your remote has 2 midi outs and it's possible to set them up differently.

ehunter · #6 16.04.2009, 03:31 PM

I did make sure the cable was using midi out 1 , but not sure if the novation was set to use that, is that what the problem could be?

ehunter · #7 17.04.2009, 12:46 AM

Ok I cant really find much information how to set the remote sl up just for midi, this is really weird if anyone can simplify this for me that would be great I just can find which menu I should get into on the novation to make sure its sending midi out the right port

johnwally · #8 17.04.2009, 02:56 AM

I was having the same problem , I have a Remote SL set to midi 1 with my Virus A , check on the Virus that it is not set to Midi thru , that was my problem all is sweet now

ehunter · #9 17.04.2009, 02:59 AM

Quote:

Originally Posted by johnwally

I was having the same problem , I have a Remote SL set to midi 1 with my Virus A , check on the Virus that it is not set to Midi thru , that was my problem all is sweet now

where do I check that?

johnwally · #10 15.04.2009, 12:45 PM

Sounddiver is for Virus a though?