I have been working on a template for the TI Snow/TI series(strain

) for the Novation ReMOTE midi controllers. I have found an incomplete list of CC#s that I am using to map the TI.
The mapping is nearly complete...The Vocoder and input follower is not mapped, nor the mod matrix. I welcome anyone with a ReMOTE midi controller to improve upon these. Perhaps someone knows the sysex required for additional functions.
Update: Using Midi-Ox and a hex editor I found some sysex controls...hope you guys like this...its taken a lot of work
The controlls are as follows (left to right):
Page 1: ------------------------------
Top Left Row Buttons:
(1)Osc 1 Mode
Top Left Encoders:
(1)Osc 1 Shape, Index. HS Density
(2)Osc 1 Wave #, Wavetable
(3)Osc 1 Pulse Width, Hypersaw Detune
(4)Osc 1 Semitune
(5)Osc 1 Keyfollow
(6)Osc 1 Sync Frequency
(7)Osc 1 Detune
(8>Osc 1/2 Balance
Mid Left Row Buttons:
(1)LFO 1 Mono/Poly Select
(2)LFO 1 Envelope Mode
Lower Left Pots:
(1)LFO 1 Shape
(2)LFO 1 Rate
(3)LFO 1 Contour
(4)LFO 1 Trigger Phase
(5)LFO 1 Key Follow
(6)LFO 1 +Osc 1 Pitch
(7)LFO 1 +Osc 2 Pitch
(8>LFO 1 Pulse Width
Drum Pads: Not Mapped
Top Right Sliders:
(1)Amp Attack
(2)Amp Dcay
(3)Amp Sustain
(4)Amp Release
(5)Amp Sustain Slope
(6)Transpose
(7)Patch Volume
(8>Panorama
Mid Right Row Buttons: Not Mapped
Lower Right Row Buttons: Not Mapped
Page 2: ------------------------------
Top Left Row Buttons:
(1)Osc 2 Mode
Top Left Encoders:
(1)Osc 2 Shape, Index. HS Density
(2)Osc 2 Wave #, Wavetable
(3)Osc 2 Pulse Width, Hypersaw Detune
(4)Osc 2 Semitune
(5)Osc 2 Keyfollow
(6)Osc 2 FM Amount
(7)Osc 2 Filter Envelope>Pitch
(8>Osc 2 Filter Envelope>FM
Mid Left Row Buttons:
(1)LFO 2 Mono/Poly Select
(2)LFO 2 Envelope Mode
Lower Left Pots:
(1)LFO 2 Shape
(2)LFO 2 Rate
(3)LFO 2 Contour
(4)LFO 2 Trigger Phase
(5)LFO 2 Key Follow
(6)LFO 2 +Cutoff 1
(7)LFO 2 +Cutoff 2
(8>LFO 2 Shape 1+2
Drum Pads: Not Mapped
Top Right Sliders:
(1)Filter Attack
(2)Filter Dcay
(3)Filter Sustain
(4)Filter Release
(5)Filter Sustain Slope
(6)Filter 1 Key Follow
(7)Filter Envelope Amount
(8>Filter 1/2 Balance
Mid Right Row Buttons:
(1)Filter 1 Mode
(2)Filter Routing
(3)Filter Envelope 1 Polarity Select
(4)Filter Envelope 2 Polarity Select
(5)Cutoff Link On/Off
(6)FM Mode Select
Lower Right Row Buttons: Not Mapped
Page 3: ------------------------------
Top Left Row Buttons: Not Mapped
Top Left Encoders:
(1)Osc 3 Mode
(2)Osc 3 Semitone
(3)Osc 3 Volume
(4)Osc 3 Detune
(5)LFO 1 Resonance
(6)LFO 1 Gain
(7)LFO 2 FM Amount
(8>LFO 2 Panorama
Mid Left Row Buttons: Not Mapped
Lower Left Pots:
(1)LFO 1 Clock Select
(2)LFO 2 Clock Select
(3)LFO 1 Target Assign
(4)LFO 2 Target Assign
(5)LFO 1 Amount
(6)LFO 2 Amount
(7)Sub Osc Volume
Drum Pads: Not Mapped
Top Right Sliders:
(1)LFO 3 Clock Select
(2)LFO 3 Rate
(3)LFO 3 Shape
(4)LFO 3 Mode
(5)LFO 3 Key Follow
(6)LFO 3 Fade Amount
(7)LFO 3 Target Assign
(8>LFOO 3 Amount
Mid Right Row Buttons: Not Mapped
Lower Right Row Buttons: Not Mapped
Page 4: ------------------------------
Top Left Row Buttons:
(1)Delay Type Select
Top Left Encoders:
(1)Delay Send Amount
(2)Delay Feedback
(3)Delay Mode
(4)Delay Clock Select
(5)Delay Time Amount
(6)Delay Color/Frequency
(7)Delay Mod Rate
(8>Delay Modulation/Depth
Mid Left Row Buttons: Not Mapped
Lower Left Pots:
(1)Delay Mod Shape
(2)Delay Ratio Select
(3)Delay Bandwidth
(4)Not Mapped
(5)Unison Voices Select
(6)Unison Detune
(7)Unison LFO Phase
(8>Unison Pan Spread
Drum Pads: Not Mapped
Top Right Sliders:
(1)Delay Left Clock Select
(2)Delay right Clock Select
(3)Not Mapped
(4)Chorus Mix
(5)Chorus Delay
(6)Chorus Feedback
(7)Chorus Mod Rate
(8>Chorus Mod Depth
Mid Right Row Buttons:
(1)Chorus Mod Wave Select
Lower Right Row Buttons: Not Mapped
Page 5: ------------------------------
Top Left Row Buttons:
(1)Reverb Mode
(2)Reverb Type
Top Left Encoders:
(1)Reverb Send Amount
(2)Reverb Clock Value
(3)Reverb Time
(4)Reverb Dampening
(5)Reverb Color
(6)Reverb Pre-Delay
(7)Reverb Feedback
Mid Left Row Buttons: Not Mapped
Lower Left Pots:
(1)Lo-Eq Frequency
(2)Lo-Eq Gain
(3)Mid-Eq Frequency
(4)Mid-Eq Q-Factor
(5)Mid-Eq Gain
(6)Hi-Eq Frequency
(7)Hi-Eq Gain
Drum Pads: Not Mapped
Top Right Sliders:
(1)Distortion Type
(2)Distotion Mix
(3)Distortion Intensity
(4)Distortion Treble Boost
(5)Distortion High Cut
(6)Distortion Quality
Mid Right Row Buttons: Not Mapped
Lower Right Row Buttons: Not Mapped
Page 6: ------------------------------
Top Left Row Buttons:
(1)Character Type
(2)Phaser Stages
Top Left Encoders:
(1)Character Intensity
(2)Character Frequency
(3)Phaser Mix
(4)Phaser Frequency
(5)Phaser Feedback
(6)Phaser Mod Rate
(7)Phaser Mod Depth
(8>Phaser Spread
Mid Left Row Buttons:
(1)Frequency Shifter Type
Lower Left Pots:
(1)Frequency Shifter Mix
(2)Frequency Shifter Frequency
(3)Frequency Shifter Stereo Phase
(4)Frequency Shifter Shape Left
(5)Frequency Shifter Shape Right
(6)Cutoff
(7)Resonance
Drum Pads: Not Mapped
Top Right Sliders:
(1)Arp Pattern
(2)Arp Resolution
(3)Arp Note Length
(4)Arp Swing Factor
(5)Tempo
Mid Right Row Buttons:
(1)Arp Mode
(2)Arp Octaves
(2)Arp Hold On/Off
Lower Right Row Buttons: Not Mapped
The XY pad is mapped to cutoff in +y and resonance in +x
---- to install:
NOTE: Template includes pages to allow easier editing, thus
templates must be sent in sequential order (e.g) template for page 1 stored as template #1, template for page 2 stored as template #2...etc
To change pages while using controller, press the side buttons on the controller(row select). Mutiple selections will trigger page changes. The LCD will reflect these changes.
Let me know if you find any bugs, etc.
I will update this thread as I map more controlls
Enjoy
-Daniel