Access Virus & Virus TI community since 2002 Virus TI Infekted

Go Back   The Unofficial Access Virus & Virus TI Forum - since 2002 > Discussion concerning Access products > Trouble with your Access Virus?

Trouble with your Access Virus? Here you can get help when you have trouble or just don't know what to do.

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 18.01.2010, 09:40 AM
moyboy60 moyboy60 is offline
New here
New here
 
Join Date: 19.08.2009
Posts: 2
Default How do you open up a Virus KC?

I've got a few keys on my KC that take a little extra pressure to sound. I tried opening the thing up by removing what I thought were the obvious screws but had no luck. Does anyone know which screws need to be removed to gain access to the keys?
Reply With Quote
  #2  
Old 09.05.2010, 07:40 AM
ultrashock ultrashock is offline
Banned
Newborn
 
Join Date: 09.05.2010
Posts: 1
Default

Hi!
you have to unscrew the screws on the sides of the virus outlying the wooden sides and on the back side under the jacks board.
then take a look at the two screws in the bottom of you KC left the wheels
then you have to mess a bit with the top board removal - there should be a bit of fortune as well
Reply With Quote
  #3  
Old 09.05.2010, 12:56 PM
Timo's Avatar
Timo Timo is offline
Administrator
This forum member lives here
 
Join Date: 13.07.2003
Location: Kaoss Central, England
Posts: 2,562
Default

Keys, as in the white/black keys? Or keys as in buttons?

If the notes, it's really easy.



^ My Indigo.



^ Turned over, all highlighted screws need to be removed.



^ Turned over again. The keybed now slips out!



^ The keybed is still attached via a ribbon cable, shown highlighted, so this needs to be disconnected.



^ Indigo sans keybed.

Of course the Indigo will be different to yours, but hopefully not too much.
Reply With Quote
  #4  
Old 01.06.2011, 03:01 AM
mannloon's Avatar
mannloon mannloon is offline
New here
New here
 
Join Date: 21.01.2007
Posts: 9
Default

I'm about to open up my KC and replace a key, I hadn't seen anything like this on the net anywhere, my god I hope the keyboard in the KC comes out like that. It would make things so much easier. Also just thought I'd mention, dealing with Access for replacement parts was seriously the easiest thing ever. What an outstanding company.
Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 04:20 PM.
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Skin Designed by: Talk vBulletin
Copyright ©2002-2022, Infekted.org